Alpine KTA-200M Mono Power Pack Amp with Alpine S-W10D2 10" Subwoofer and Bass Knob - This bundle includes a Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, a Alpine S-W10D2 S-Series 10" Dual 2-Ohm Subwoofer, a Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine coozy.
Alpine KTA-200M Mono 400-Watt Power Pack Amplifier
• CTA-2006
• PowerStack capable with the Alpine iLX-W650
• Alpine’s Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
• 200W x 1 RMS (4Ω, 14.4V, ≤1% THD+N)
• 200W x 1 RMS (2Ω, 14.4V, ≤1% THD+N)
• 400W x 1 DPP (2Ω, 14.4V, ≤1% THD+N)
• >85dB S/N (ref. 1W into 4Ω)
• ≤0.1% THD+N (ref. 10W into 2Ω)
• Single-side 22-pin connector
• RCA inputs (selectable, Low range=0.2-4V)
• Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice coils.
Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow optimized dual flare pole vent
65mm voice coil with high-temp 5-layer dvc winding on aluminum former
high-grade strontium ferrite magnets
8-AWG push terminals with voice coil configuration jumpers
Progressive spider with reinforced tinsel leads
15MM Xmax
64mm Xmech
600W RMS
4.7" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Alpine RUX-KNOB.2 Remote Bass Knob
With the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Alpine KTA-200M Mono 400-Watt Power Pack Amplifier
• CTA-2006
• PowerStack capable with the Alpine iLX-W650
• Alpine’s Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
• 200W x 1 RMS (4Ω, 14.4V, ≤1% THD+N)
• 200W x 1 RMS (2Ω, 14.4V, ≤1% THD+N)
• 400W x 1 DPP (2Ω, 14.4V, ≤1% THD+N)
• >85dB S/N (ref. 1W into 4Ω)
• ≤0.1% THD+N (ref. 10W into 2Ω)
• Single-side 22-pin connector
• RCA inputs (selectable, Low range=0.2-4V)
• Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice coils.
Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow optimized dual flare pole vent
65mm voice coil with high-temp 5-layer dvc winding on aluminum former
high-grade strontium ferrite magnets
8-AWG push terminals with voice coil configuration jumpers
Progressive spider with reinforced tinsel leads
15MM Xmax
64mm Xmech
600W RMS
4.7" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Alpine RUX-KNOB.2 Remote Bass Knob
With the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Click image to download warranty PDF
UPC: |
841992154599 |
Bundle: |
Yes |
Feature 1: |
KTA-200M - The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in compact size, easy installation and overall power. |
Feature 2: |
KTA-200M - The ratio of power to price is unmatched in the industry, as the KTA-200M doubles its power from 200 to 400 watts with Alpine’s DPP technology. |
Feature 3: |
S-W10D2 - Power handling: 250-600W RMS |
Feature 4: |
S-W10D2 - 4.7" mounting depth |
Feature 5: |
Includes pry kit and Alpine RUX-KNOB.2 Remote Bass Knob |
Condition: |
NEW |
Weight: |
15.0000 lbs |
ASIN: |
B08M4DM1RQ |
