Description
Included in this kit
Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-200M Mono and KTA-450 4-Channel PowerStack Amplifiers - This bundle includes a Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure, a Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, a Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, At 2 Or 4 Ohms, a pry kit, and an Alpine coozy.
Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure
Specifications:
• Includes S-W12D4 wired in parallel
• 600W RMS power handling
• 2Ω Impedance
• Ported enclosure design
• Frequency response: 26-200 Hz
• Vented enclosure tuning frequency: 35 Hz
Alpine KTA-200M Mono 400-Watt Power Pack Amplifier
Specifications:
• CTA-2006
• PowerStack capable with the Alpine iLX-W650
• Alpine’s Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
• 200W x 1 RMS (4Ω, 14.4V, ≤1% THD+N)
• 200W x 1 RMS (2Ω, 14.4V, ≤1% THD+N)
• 400W x 1 DPP (2Ω, 14.4V, ≤1% THD+N)
• >85dB S/N (ref. 1W into 4Ω)
• ≤0.1% THD+N (ref. 10W into 2Ω)
• RCA inputs (selectable, Low range=0.2-4V)
• Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine KTA-450 4-Channel Power Pack Amplifier with PowerStack Capability
Specifications:
• Power output 4-Ohm @ 14.4 Volts: 50 W RMS X 4
• Power output 2-Ohm @ 14.4 Volts: 45 W RMS X 4
• Dynamic Peak Power output 4-Ohm @ 14.4 Volts: 100 W RMS X 4
• Dynamic Peak Power output 2-Ohm @ 14.4 Volts: 100 W RMS X 4
• THD 10 W into 4 Ohms: Less Than 0.2%
• THD 10 W into 2 Ohms: Less Than 0.1%
• THD Rated Power 4 Ohms: Less Than 0.1%
• THD Rated Power 2 Ohms: Less Than 0.1%
• S/N Ratio: 1 W into 4 Ohms: >85dB
• Frequency Response:+0/-3 dB 15Hz - 50kHz
• Input Sensitivity: RCA (0.152 - 2.80V), Speaker (0.33 - 6.05V)
• Crossover: Variable HPF/LPF, (OFF/60/80/120Hz)
