MB Quart FA1-1000.1 Formula Series 1 x 250 Watts @ 4 Ohms, 1 x 500 Watts @ 2 Ohms, 1 x 1000 Watts @ 1 Ohm
MB Quart Formula series mono subwoofer car audio amplifier featuring innovative sound quality and power technology. The FA1-1000.1 is a 1000 watt 1 ohm stable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit. Bass remote is included.
Specifications:
• CLASS - Class Q1 Mono (Class D)
• TOTAL CHANNELS - Mono
• POWER @ 1 OHM - 1 x 1000 Watts
• POWER @ 2 OHMS - 1 x 500 Watts
• POWER @ 4 OHMS - 1 x 250 Watts
• CROSSOVER - Electronic
• VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE - Switched
• VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE - Variable, 50Hz - 250Hz
• BASS BOOST - 0-12dB
• VARIABLE VOLTAGE - .02 - 9V
• SIGNAL TO NOISE - >90
• FREQUENCY RESPONSE - 15Hz-250Hz
• TOTAL HARMONIC DISTORTION (THD) - Less Than 0.10%
• SPEAKER LEVEL AUDIO INPUTS - RCA Jack
• POWER TERMINAL 12V/GND - 4 awg
• SPEAKER TERMINAL WIRE GAUGE - 12 awg
ELECTRONIC EQUALIZER - Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
CLASS / TOPOLOGY - Class Q1 Mono (Class D): MB Quart’s Class Q1 offers the efficiency of today’s D-Class with increased engineering to focus on sound quality from the power supply through the output devices, the FLUID-FETS.
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS - Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
BASS REMOTE INCLUDED - Included on mono and 5 channel amplifiers. This allows the driver to make subtle changes to the bass respond of the audio system from the seated listening position.
MB Quart Formula series mono subwoofer car audio amplifier featuring innovative sound quality and power technology. The FA1-1000.1 is a 1000 watt 1 ohm stable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit. Bass remote is included.
Specifications:
• CLASS - Class Q1 Mono (Class D)
• TOTAL CHANNELS - Mono
• POWER @ 1 OHM - 1 x 1000 Watts
• POWER @ 2 OHMS - 1 x 500 Watts
• POWER @ 4 OHMS - 1 x 250 Watts
• CROSSOVER - Electronic
• VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE - Switched
• VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE - Variable, 50Hz - 250Hz
• BASS BOOST - 0-12dB
• VARIABLE VOLTAGE - .02 - 9V
• SIGNAL TO NOISE - >90
• FREQUENCY RESPONSE - 15Hz-250Hz
• TOTAL HARMONIC DISTORTION (THD) - Less Than 0.10%
• SPEAKER LEVEL AUDIO INPUTS - RCA Jack
• POWER TERMINAL 12V/GND - 4 awg
• SPEAKER TERMINAL WIRE GAUGE - 12 awg
ELECTRONIC EQUALIZER - Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
CLASS / TOPOLOGY - Class Q1 Mono (Class D): MB Quart’s Class Q1 offers the efficiency of today’s D-Class with increased engineering to focus on sound quality from the power supply through the output devices, the FLUID-FETS.
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS - Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
BASS REMOTE INCLUDED - Included on mono and 5 channel amplifiers. This allows the driver to make subtle changes to the bass respond of the audio system from the seated listening position.
UPC: |
806576230144 |
Bundle: |
No |
Feature 1: |
ON BOARD EQUALIZATION - The Formula Series of amplifiers have built in equalization to fine tune the system with Low Pass, High Pass and Level Control. |
Feature 2: |
The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality. |
Feature 3: |
MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers. |
Feature 4: |
The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off. |
Condition: |
NEW |
Manufacturer SKU: |
FA1-1000.1 |
Weight: |
6.000 lbs |
ASIN: |
B07VN9V2V6 |
