Focal Chora 826-D 3-way bass reflex floorstanding loudspeaker Black, Sold Individually


No reviews yet Write a Review
40% Off!
You save $600.00
You save $600.00


Focal Chora 826-D 3-way bass reflex floorstanding loudspeaker With Dolby Atmos Black, Sold Individually

Chora 826-D is a loudspeaker equipped with a specific speaker driver that reproduces Dolby Atmos effects: for ultra-realistic 3D soundtracks and total immersion in the films you watch. Positioned on the top of the loudspeaker, this full-range speaker driver directs the sound towards the ceiling to reflect it back to the listener. Action scenes in the air, pouring rain or a rolling thunder are all brought to life. At the same time, its directional baffle allows you to locate the sounds effects as though you had loudspeakers in the ceiling! Imagine a scene in a house: you hear conversations, but also the noise of cutlery, of footsteps... all of these spatialised in three dimensions as though you were actually there!

Combining French manufacturing and design, this product also incorporates exclusive Focal technologies, particularly the Slatefiber cone of the midrange and bass speaker drivers or the Aluminium/Magnesium TNF tweeter for greater treble clarity. For example, combined with the Chora Surround and Chora Center speakers, or the Chora Center and Chora 806 speakers, Chora 826-D guarantees a sensational system.

Key Features:
• 5" (13cm) full-range speaker driver Slatefiber cone with Al/Mg dome
• Directional baffle for accurate and located Dolby Atmos effects
• 6-1/2” (16.5cm) Slatefiber midbass Dynamic and precise
• Two 6-1/2”(16.5cm) Slatefiber woofers Rigid Cone Powerful bass
• TNF Aluminium/Magnesium Tweeter
• Aerodynamic front port Low distortion
• Tilted stand for Time Alignment
• Magnetic Grille
• Sleek design
• High-fidelity 3-way loudspeaker providing precise, dynamic sound
• 3-way floorstanding loudspeaker, Dolby Atmos compatible
• New speaker drivers with Slatefiber cone developed and manufactured in France by Focal
• Time Alignment thanks to the tilted stand: better soundstage

• Type: 3-way bass-reflex floorstanding loudspeaker / ATMOS - 1-way sealed
• Drivers: 2 x 6-1/2" (16.5cm) Slatefiber Woofer, 6-1/2" (16.5cm) Slatefiber Midrange, 1" (25mm) TNF Al/Mg inverted dome tweeter / ATMOS - 5-1/8” (13cm) full-range speaker driver
• Sensitivity (2,83V/1m): 91dB / ATMOS - 91dB
• Frequency response (±3 dB): 48Hz-28kHz / ATMOS - 100Hz-20kHz
• Low frequency point (-6 dB): 39Hz / ATMOS - 90Hz
• Nominal impedance: 8Ω / ATMOS - 6Ω
• Minimum impedance: 2.9Ω
• Recommended amplifier power: 40/250W
• Crossover frequency: 270Hz - 2.700Hz
• Dimensions (HxWxD): 41-1/2" x 11-7/8" x 15-1/4" (105.3x30.3x38.8cm)
• Net weight (unit with grille): 46.6lbs (21.15kg)
• Packaging dimensions (HxWxD): 44-1/2" x 13-3/8" x 18-7/8" (113x34x48cm)
• Net weight (with packaging): 52.9lbs (24kg)

The TNF Aluminium/Magnesium tweeter - Soft And Precise Treble.

The surround linking the dome to its stand uses a memory foam material called Poron. This surround is directly derived from the Utopia’s famous Beryllium tweeter and reduces distortion by a third between 2,000Hz and 3,000Hz, the ear’s high-sensitivity range. The spatialisation and very low directionality of the inverted dome allow silky trebles to be heard from any point in your listening room.

The Slatefiber cone - Perfectly Balanced Sounds.

Slatefiber technology, exclusive to Focal, involves the use of recycled, non-woven carbon fibres applied as a sandwich between two layers of thermoplastic polymer. In their quest for perfection, Focal engineers have opted to use non-woven carbon fibres, all pointing in the same direction to achieve even greater rigidity and better damping. Manufactured in the Focal workshops using an ultra-modern industrial tool, the “slate” effect of the cone provides better damping and rigidity, but also lightness – the three “essentials” of a good speaker driver.

Sleek, Modern design.

The Chora range offers a modern design, the slate colour of the Slatefiber cone adding a final refined, authentic touch. The stand (optional) is tilted for Time Alignment which provides an optimal soundstage, more focused on the listener.

Three Beautiful Finishes.

Chora is available in three finishes: Black, Light Wood and Dark Wood. On-trend colours that blend into different interiors and lend them a unique aesthetic signature.

Extra Information

48.50 LBS
Feature 1:
3-way floorstanding loudspeaker, Dolby Atmos® compatible
Feature 2:
Full-range speaker driver with directional baffle for accurate and located Dolby Atmos effects
Feature 3:
Slatefiber technology: a dynamic, rich and ultra-balanced sound
Feature 4:
Chora 826-D is the reference Home Cinema loudspeaker from the Chora line.
Manufacturer SKU:
48.5000 lbs
Free 2-Day Shipping!