Description
HD1200/1
High Quality tested & remanufactured by JL Audio. 90 day JL Audio Re-Manufactured warranty included.
Monoblock Class D Wide-Range Amplifier, 1200 W x 1 @ 1.5-4 Ω
Our most powerful amplifier ever employs our advanced Single-Cycle Control switching design and R.I.P.S. technology to deliver 1200 W of clean power into any impedance between 1.5 and 4 Ω, giving you the highest degree of flexibility in designing your subwoofer system. Tight power supply regulation keeps distortion down and maximizes your bass quality. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price.
While targeted primarily to subwoofer applications, the HD1200/1 is a wide-range amplifier and can also be used to drive high-performance mid-range speaker systems.
This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 1200 W RMS x 1 |
| @ 3 Ω | 1200 W RMS x 1 |
| @ 2 Ω | 1200 W RMS x 1 |
| @ 1.5 Ω | 1200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 1200 W RMS x 1 |
| @ 3 Ω | 1200 W RMS x 1 |
| @ 2 Ω | 1200 W RMS x 1 |
| @ 1.5 Ω | 1200 W RMS x 1 |
General Specifications
| Frequency Response | 6 Hz - 8 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >110 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Main Channels) | >79 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >500 / 50 Hz |
| Damping Factor @ 2 Ω | >250 / 50 Hz |
| THD+N @ Rated Power (Main Channels) | <0.03% @ 4 Ω |
| Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 2 AWG wire |
| Fuse Rating | 100 A (AFS, AGU or MaxiFuse™) |
Physical Specifications
| Height (H) | 1.93 in / 49 mm |
| Width (W) | 10.74 in / 273 mm |
| Depth (D) | 8.29 in / 211 mm |
| Net Weight | 6.6 lb / 2.99 kg |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (HD-RLC) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Refurbished FAQ
Refurbished Frequently Asked Questions
- What does refurbished mean? Refurbished products may be unused customer returns that are essentially "new" items, or they may be defective products that were returned under warranty, and resold by the manufacturer after repairing the defects and ensuring proper function.
- What is the warranty? All of our manufacturer refurbished items come with a 90-day warranty. Compared to the new products we carry generally having a 1-year or longer warranty. (JL Audio Amps are 2-years, and all of Wet Sounds carries a 2-year warranty when new)
- What's it look like? A lot of the manufacturer refurbished products we sell generally look very good, and sometimes you can't even tell. However, these products can have some wear and tare on them, and we generally rate them an 8/10 cosmetically, and perfect 10/10 functionally.
- What was wrong with it? We aren't told what is wrong with each and every product. Like stated above, they could have just been a return or they may have had an issue. Regardless, they are all combed over by their respective manufacturer to function as new before being shipped to us.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.
