XD200/2v2
2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The XD200/2v2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.
The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 75 W RMS x 2 |
| @ 2 Ω | 100 W RMS x 2 |
| Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 60 W RMS x 2 |
| @ 2 Ω | 90 W RMS x 2 |
| Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional (HD-RLC) |
| Security Cover for Controls | Yes |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 174 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
- SKU:
- XD200/2v2-UOB
- UPC:
- 699440986007
- Condition:
- Used
- Availability:
- An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Shipping:
- Free 2-Day Shipping!
Manufacturer SKU: |
98600 |
RMS Power In Watts: |
1-250 Watts |
Number Of Channels: |
2 Channel |
UPC: |
699440986007 |
Bundle: |
No |
Feature 1: |
The amazingly small XDv2 amplifiers are huge in audio performance, thanks to our advanced NexD™ switching technologies. These technologies allow XDv2 amplifiers to achieve efficiencies exceeding 80%, meaning far less heat and strain on your vehicle's |
Feature 2: |
This efficiency advantage, combined with state-of-the-art microelectronic components, allows us to use very compact unitary cast alloy heat sinks. |
Feature 3: |
Just like their more expensive HD siblings, XDv2's deploy our Advanced Thermal Rollback System to completely eliminate annoying thermal shut-down events. |
Feature 4: |
Beneath every XDv2's removable control cover, you will find studio-grade signal processing with fully variable crossover filters. Also included are our noise-killing, highly flexible differential-balanced inputs |
Feature 5: |
Spec feature set consists of automatic turn-on capability (via signal sensing or DC-offset sensing) and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. |
Condition: |
USED |
Manual: |
Click Here">Click here to download |
Weight: |
5.0000 lbs |
