Description
Included in this kit
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather Resistant Amplifiers - This bundle includes a Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, a Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine coozy.
Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
• Includes S-W10D4 wired in parallel
• 600W RMS power handling
• 2Ω Impedance
• Ported enclosure design
• Frequency response: 28-200 Hz
• Vented enclosure tuning frequency: 36 Hz
• Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 300W x 1 D.P.P. (2Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 200W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch input
Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 150W x 4 D.P.P. (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 75W RMS x 4 (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
