Description
Included in this kit
This bundle includes an Alpine UTE-73BT Mech-less Digital Media Receiver with Bluetooth® Wireless Technology, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, and an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms.
1x Alpine UTE-73BT Mech-less Digital Media Receiver with Bluetooth® Wireless Technology - (UTE-73BT)
Mech-less AM/FM tuner with RBDS information
FLAC/MP3/WMA audio file compatibility via USB
Made for iPod® and iPhone®
Android™ AOA 2.0 compatible
Works with Pandora® Music for iPhone® and Android™ phones
Built-in Bluetooth® wireless technology with audio streaming
Front USB port and AUX port
1-line, high-contrast LCD display with RGB illumination
Three preouts (2V)
Built-in 18W x 4 amplifier (at CEA-2006 rating)
24-Bit DAC
3-band parametric EQ
High pass/Low pass crossover
Steering wheel remote and wireless remote ready
1x Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier - (KTA-30FW)
Get a huge increase in sound performance over your factory system. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30FW Weather Resistant Tough Power Pack is sure to add higher output and increased dynamic range for those open cab vehicles and toys.
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 150W x 4 D.P.P. (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 75W RMS x 4 (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch/4ch input (selectable)
DYNAMIC PEAK POWER
The KTA-30FW features Alpine’s exclusive Dynamic Peak Power (DPP) technology which uses a new dynamic power supply design that delivers bursts of power during rigorous musical passages. When the amplifier senses that more power is required, the power supply quickly increases the internal gain level, effectively doubling the power for a significant increase in dynamic range at high music volumes.
WEATHER RESISTANT FORMAT
The KTA-30FW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30FW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS.
The KTA-30FW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t.
1x Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms - (KTA-30MW)
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 300W x 1 D.P.P. (2Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 200W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch input
The KTA-30MW is perfect for when you want to boost your sound system but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30MW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t. The KTA-30MW can be tucked away under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
