Description
Two-way Component System: 6.5" (165 mm) Woofer, 1" (25 mm) Silk Dome Tweeter
Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability.
Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5" (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultralow distortion.
The 1" (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors ā all accessible beneath a protective, polycarbonate cover.
C6 Woofer Features:
ā¢ Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
ā¢ Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
ā¢ Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeterās response
ā¢ Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
ā¢ Cast alloy frame with our Elevated Frame Cooling feature
ā¢ Includes fine mesh grilles
C6 Tweeter Features:
ā¢ Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
ā¢ Neodymium motor delivers high magnetic flux from a compact motor design
ā¢ Ferrofluid cooling and damping improves reliability and response smoothness
ā¢ Includes surface- and flush-mount fixtures
Woofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo.
Speakers are sold as a pair.
Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability.
Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5" (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultralow distortion.
The 1" (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors ā all accessible beneath a protective, polycarbonate cover.
C6 Woofer Features:
ā¢ Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
ā¢ Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
ā¢ Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeterās response
ā¢ Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
ā¢ Cast alloy frame with our Elevated Frame Cooling feature
ā¢ Includes fine mesh grilles
C6 Tweeter Features:
ā¢ Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
ā¢ Neodymium motor delivers high magnetic flux from a compact motor design
ā¢ Ferrofluid cooling and damping improves reliability and response smoothness
ā¢ Includes surface- and flush-mount fixtures
Woofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo.
Speakers are sold as a pair.
General Specifications
| Continuous Power Handling (RMS) | 100 W |
| Recommended Amplifier Power (RMS) | 30 - 100 W / Ch. |
| System Efficiency | 87.37 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ī© |
| System Frequency Response | 53 Hz ā 21 KHz Ā± 3 dB |
Woofer Physical Specifications
| Frame Outer Diameter* (A) | 6.50 in / 165 mm |
| Grille Tray Outer Diameter** (B) | 6.76 in / 172 mm |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion (D) | N/A |
| Frontal Grille Protrusion*** (E) | 1 in / 25 mm |
| Mounting Hole Diameter (F) | 5.46 in / 139 mm |
| Mounting Depth (G) | 2.60 in / 66 mm |
|
*Does not take into account mounting tabs |
|
Tweeter Physical Specifications
| Flush Mount Fixture Diameter (A1) | 2.13 in / 54 mm |
| Surface Mount Fixture Diameter (A2) | 2.16 in / 55 mm |
| Flush Mount Mounting Hole Diameter (B) | 1.88 in / 48 mm |
| Flush Mount Mounting Depth (C) | 0.73 in / 19 mm |
| Flush Mount Tweeter Frontal Protrusion (D1) | 0.33 in / 8 mm |
| Surface Mount Tweeter Frontal Protrusion (D2) | 1.06 in / 27 mm |
Crossover Physical Specifications
| Width (W) | 3.36 in / 85 mm |
| Height (H) | 1.44 in / 37 mm |
| Depth (D) | 4.72 in / 120 mm |
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.