Description
Included in this kit
This bundle includes a Clarion CMM-10 Marine Source Unit with LCD Display, a Clarion CMSP-651RGB-SWG Premium 6.5-inch Coaxial Marine Speakers with built-in RGB illumination, 50W RMS, with White & Gray Metallic Grilles, and a Clarion CMR-L1 Marine LED Light Controller.
1x Clarion CMM-10 Marine Source Unit with LCD Display - (CMM-10)
Engineered for marine and powersports applications, the CMM-10 is an ultra-compact, weatherproof (IP66 rated) source unit with built-in power and versatile audio features.
Outfitted with a variety of mechless audio source options, the CMM-10 features a global, digital AM/FM tuner with RDS (Radio Data System) display info, Bluetooth® audio streaming and a USB 2.0 input for playback from your USB storage device (with 1A charging), all designed to deliver non-stop audio, no matter how rough your outdoor adventures may get.
A rugged, weatherproof (IP66 rated) chassis houses a 2.09-inch (53 mm) LCD display with large text and dimmable control for nighttime viewing. When in motion, you'll appreciate its single rotary control, backlit buttons and uncluttered user interface.
Flexible audio output options include a rock-solid, onboard amplifier, capable of powering your speakers with 80 watts (20W RMS x 4 @ 4 ohms) of high-fidelity sound to two main zones, as well as a stereo pair of crystal-clear preamp outputs (1.5V RMS), with selectable Zone 2 or subwoofer functionality. Customize your sound with onboard tone controls (Bass & Treble), plus independent subwoofer zone level control.
Built to exceed industry standards for salt fog/UV exposure and vibration (ASTM B117/D4329)
IP66 rated design and construction
2.09-inch (53 mm) LCD display with dim control
Intuitive interface with large text
Single rotary control and backlit buttons
Global, digital AM/FM tuner with RDS (Radio Data System) extended display info
Save up to 9 of your favorite AM/FM tuner stations
Wireless Bluetooth® audio streaming
USB 2.0 input with 1A charging output
Built-in Amplifier: 4 x 20W RMS at 4 Ohms
2-channel preamp (1.5V RMS) outputs (Zone 2 or subwoofer)
Built-in tone (Bass/Treble) controls
Independent subwoofer zone level control
1x Clarion CMSP-651RGB-SWG Premium 6.5-inch Coaxial Marine Speakers with built-in RGB illumination, 50W RMS, with White & Gray Metallic Grilles - (CMSP-651RGB-SWG)
Includes White & Gray Metallic Sport Grilles
Salt & Sun Certified
Built-In RGB LED Lighting
50W RMS power handling, perfect for use with Clarion Marine amplifiers
Bridge-mounted, 1-inch (25 mm), edge-driven, silk dome tweeter with neodymium magnet and ferrofluid cooling
Standard cutout size and screw hole pattern for easy retrofitting
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Transmitter Battery CR2025 (3V)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.