Clarion CMS4 Black Box Digital Media Receiver with CMS-651RGB-SWB 6.5-inch LED RGB Marine Coaxial Speakers, Sport Grilles Includes Lighting Remote

Included in this kit

---

This bundle includes a Clarion CMS4 Black Box Digital Media Receiver with Commander True Independent 4-Zone Source and Volume 3.5-inch Full Color LCD Display Water Resistant: IP66 commander, IPX5 black box, a Clarion CMS-651RGB-SWB 6.5-inch Coaxial Marine Speakers with built-in RGB illumination 30W RMS power handling 1/2-inch (13 mm) polymer dome tweeter Includes White & Black Sport Grilles, and a Clarion CMR-L1 Marine LED Light Controller.

1x Clarion CMS4 Black Box Digital Media Receiver with Commander True Independent 4-Zone Source and Volume 3.5-inch Full Color LCD Display Water Resistant: IP66 commander, IPX5 black box - (CMS4)

Water and salt can be a marine source unit's worst nightmare. Our CMS4 source unit is IP66 tested to provide you the very best water intrusion and salt protection in its class. It also meets or exceeds ASTM B117 (Salt fog exposure), ASTM D4329 (UV Exposure), and is even resistant to 3.0G of vibration! Besides its toughness, the CMS4 features large intuitive control buttons and two anti-slip knobs that make operation a breeze. Buttons positioned along the edges of the display controller’s face enable quick, stress-free access to functions. Customizable multi-color illumination of the buttons and knobs allows you to select your favorite color, match your boats anesthetic, or even reflect your mood. With the CMS4 Black Box installed, you can control everything from the wired watertight controller. It's simple robust design maximizes reliability. The vibrant color display allows for simple functionality with enhanced durability that can resist the most harmful of elements.

Frequency bands FM/AM/Weather Band
FM Tuner with RDS
Frequency Range: 87.9 ~ 107.9MHz (0.2MHz STEP)
AM Tuner
Frequency Range: North America 530 ~ 1710kHz (10kHz STEP)
Weather Band
NOAA Frequency Range 162.400MHz ～162.550MHz
Channel 1 : 162.400MHz
Channel 2 : 162.425MHz
Channel 3 : 162.450MHz
Channel 4 : 162.475MHz
Channel 5 : 162.500MHz
Channel 6 : 162.525MHz
Channel 7 : 162.550MHz
AUDIO
Maximum Power Output 70W × 4 @ 2Ohm Built-In Amplifier
High Pass Filter (Speaker / Lineout)
Low Pass Filter (Subwoofer)
GENERAL
Black Box Dimensions (W × H × D) (mm) 249.6 x 192 x 61.5
Commander Dimensions (W × H) (mm) 152.5 x 102
Low Consumption Mode as Power Off YLess than 50mA when POWER=OFF
Ingress Protection (IP) Rating Display Controller : IP66
Black Box : IPX5
Display Controller 3.5" TFT Display
Display Glass Corning® Gorilla® Glass

1x Clarion CMS-651RGB-SWB 6.5-inch Coaxial Marine Speakers with built-in RGB illumination 30W RMS power handling 1/2-inch (13 mm) polymer dome tweeter Includes White & Black Sport Grilles - (CMS-651RGB-SWB)

Includes White & Black Sport Grilles
Salt & Sun Certified
Built-In RGB LED Lighting
30W RMS power handling, perfect for source unit-powered systems
Bridge-mounted, 1/2-inch (13 mm) balanced-dome, polymer tweeter with neodymium magnet and ferrofluid cooling
Standard cutout size and mounting hole for easy retrofitting

1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)

The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!

Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Transmitter Battery CR2025 (3V)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm

Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.