Description
Included in this kit
This bundle includes a Clarion XC2410 300 Watt 4-Channel Class-D Marine Amplifier, a Clarion CMSP-771RGB-SWG Premium 7.7-inch Coaxial Marine Speakers with built-in RGB illumination, 60W RMS, with White & Gray Metallic Grilles, and a Clarion CMR-L1 Marine LED Light Controller.
1x Clarion XC2410 300 Watt 4-Channel Class-D Marine Amplifier - (XC2410)
Clarion amplifiers feature uncompromising resistance to magnetic noise, thereby minimizing distortion, as well as high quality terminals to offer low electrical and contact resistance. Easy subwoofer system configuration is possible with the embedded high pass filters. The result is high quality sound you can enjoy in a variety of systems. By utilizing corrosion resistant RCA and Connectors, XC series amplifiers offer improved durability and reliability in harsh environments. The XC series amplifiers are true marine amplifiers with efficient aluminum heatsinks and locking power terminals for the harsh marine conditions. There’ s only one way for Clarion’ s main units to deliver unyielding power output and linearity: MOS-FET amplification, or Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, a MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. This means you can crank up the volume or set it to easy listening. Either way, your sound will be crystal clear.
Specifications:
400 Watts of Maximum Power Output
50 Watts × 4 Continuous @ 4-Ohms
75 Watts × 4 Continuous @ 2-Ohms
150 Watts × 2 Continuous @ 4-Ohms Bridged
Double Side Conformal Coated PCB Assembly
MOS-FET Power Supply
12dB/Oct. High Pass Electronic Crossover. Variable 15 - 250Hz (FR/RR)
Variable Gain Control
Turn-On/Off Muting Circuitry (Soft Mute)
Ground Loop Isolation Input Circuit
Corrosion Resistant Nickel Plated RCA, Power, and Speaker Connections
RCA and High Level Speaker Inputs
1x Clarion CMSP-771RGB-SWG Premium 7.7-inch Coaxial Marine Speakers with built-in RGB illumination, 60W RMS, with White & Gray Metallic Grilles - (CMSP-771RGB-SWG)
7.7-inch woofer delivers more output and stronger bass, compared to the 6.5-inch model.
Includes White & Gray Metallic Sport Grilles
Salt & Sun Certified
Built-In RGB LED Lighting
Waterproof Connectors for Speaker & LED Illumination
60W RMS power handling, ideally matched to Clarion Marine amplifiers
Bridge-mounted, 1-inch (25 mm), edge-driven, silk dome tweeter with neodymium magnet and ferrofluid cooling
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.