Description
This pre-built system includes the following Cicada Audio products: DSP600.4D 600w 4 ch Amplifier, CHDRGGTK 2014 + Road Glide Grill w/ Tweeters, CM65.4 6.5-inch Mid-Bass - 4Ω, HDPG8K 8 Gauge Power/ground Harness Kit For HD, HDFiMY HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair, HDFRBoM-1.5 H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness.
DSP600.4D 600w 4 ch Amplifier
DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER
4 X 70 WRMS into 4 ohms @ 12.5 Vdc
4 X 92 WRMS into 4 ohms @ 14.4 Vdc
4 X 115 WRMS into 2 ohms @ 12.5 Vdc
4 X 152 WRMS into 2 ohms @ 14.4 Vdc
CM65.4 6.5-inch Mid-Bass - 4Ω
250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 4Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm
CHDRGGTK 2014 + Road Glide Grill w/ Tweeters
50 WRMS / 100W MAX Power Handling- per tweeter
Neodymium High Energy / Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Custom Punched Road Glide Grills
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm
Additional wiring included:
HDPG8K 8 Gauge Power/ground Harness Kit For HD
HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair
H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness
DSP600.4D 600w 4 ch Amplifier
DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER
4 X 70 WRMS into 4 ohms @ 12.5 Vdc
4 X 92 WRMS into 4 ohms @ 14.4 Vdc
4 X 115 WRMS into 2 ohms @ 12.5 Vdc
4 X 152 WRMS into 2 ohms @ 14.4 Vdc
CM65.4 6.5-inch Mid-Bass - 4Ω
250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 4Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm
CHDRGGTK 2014 + Road Glide Grill w/ Tweeters
50 WRMS / 100W MAX Power Handling- per tweeter
Neodymium High Energy / Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Custom Punched Road Glide Grills
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm
Additional wiring included:
HDPG8K 8 Gauge Power/ground Harness Kit For HD
HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair
H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness