Description
MTX JH3004
Jackhammer Series 300 Watt 4-Channel Amplifier
Easy Access Controls
The JH3004 is a high fidelity amplifier designed to drive high powered full range speakers. The top panel includes controls for both front and rear full range speakers including gain, crossover and frequency adjustment. The front panel location allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH3004 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH3004 has the functionality to up to four full range speakers. The input section features high quality RCAs (front and rear) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 4-channel or 2-channel mode depending on the Input Mode selection.
High Quality Power and Speaker Connections
The JH3004 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH3004 can play loads down to 2Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
SPECIFICATIONS • Description: 4-Channel
• Topology: Class AB
• 4Ω RMS Power Output: 60W X 4 Channel
• 4Ω Bridged: 180W x 2 Channel
• 2Ω RMS Power Output: 90W x 4 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 60dB
• Frequency Response: 20Hz to 20kHz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• High Pass Filter: 40Hz to 250Hz, 12dB/Oct
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 11.14" (283mm)
Jackhammer Series 300 Watt 4-Channel Amplifier
Easy Access Controls
The JH3004 is a high fidelity amplifier designed to drive high powered full range speakers. The top panel includes controls for both front and rear full range speakers including gain, crossover and frequency adjustment. The front panel location allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH3004 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH3004 has the functionality to up to four full range speakers. The input section features high quality RCAs (front and rear) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 4-channel or 2-channel mode depending on the Input Mode selection.
High Quality Power and Speaker Connections
The JH3004 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH3004 can play loads down to 2Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
SPECIFICATIONS • Description: 4-Channel
• Topology: Class AB
• 4Ω RMS Power Output: 60W X 4 Channel
• 4Ω Bridged: 180W x 2 Channel
• 2Ω RMS Power Output: 90W x 4 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 60dB
• Frequency Response: 20Hz to 20kHz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• High Pass Filter: 40Hz to 250Hz, 12dB/Oct
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 11.14" (283mm)