Included in this kit

---

This bundle includes 2x JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single, a JL Audio C3-100ct: 1-inch (25 mm) Component Tweeters, Pair, and a JL Audio VX400/4i 4-channel Class D Amplifier with integrated DSP, 100 Watts x 4 @ 2 ohm / 75W x 4 @ 4 ohm - 14.4V.

2x JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single - (C5-570cw-Single)

JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single

5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer

Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio's engineers have put in the time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals rock.

C5-570cw component woofers are built using Kurt Müller cones and suspensions with die-cast alloy baskets. This woofer benefits from JL Audio's vast woofer design experience and advanced modeling systems.

Passive crossover networks are not included with C5 component drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK® 88 or D8, and a dedicated amplifier channel for each C5 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.

Design Bandwidth:

With 48 dB/octave filters: 50 Hz - 5 kHz
With 24 dB/octave filters: 60 Hz - 5 kHz
With 12 dB/octave filters: 70 Hz - 5 kHz

Sonic character: Smooth and balanced

Sold individually, with one electroformed JL Audio logo. No woofer grilles are included (or available) for this speaker.
Made in Germany.

1x JL Audio C3-100ct: 1-inch (25 mm) Component Tweeters, Pair - (C3-100ct)

JL Audio C3-100ct - 1-inch (25 mm) Silk Dome Tweeters, Sold as a pair.

The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.

The C3 component tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be installed coaxially onto the C3 woofers using the fixtures included with the C3 Component / Coaxial Systems.

Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C3-100ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.

Sonic character: Clean and Powerful

• Continuous Power Handling (RMS) - 75 W
• Peak Music Power* - 225 W
• Recommended Amplifier Power (RMS) - 25 - 150 W / Ch.
• System Efficiency - 90.0 dB @ 1 W / 1 m
• System Nominal Impedance - 4 Ω
• System Frequency Response - 4 kHz - 25 KHz ± 3 dB

1x JL Audio VX400/4i 4-channel Class D Amplifier with integrated DSP, 100 Watts x 4 @ 2 ohm / 75W x 4 @ 4 ohm - 14.4V - (VX400/4i)

4-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX400/4i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up to 200 W x 2. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed. Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, 6 ft A/B USB Cable Features: Unprecedented, Onboard DSP Tuning Power! Powerful DSP permits optimizing each channel’s timing, frequency response and output levels, for exceptional sound quality. TüN™ Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN™ software is available for computers and most handheld devices. 2nd-Gen NexD2™ Switching Amplifier Technology Advanced, high-speed switching technology delivers reference-grade power and efficiency. DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion. Ultra-Versatile Analog and Digital Inputs/Outputs
 Differential-Balanced Analog Inputs accept speaker level signals up to 16V RMS, including those from factory systems. Delivers outstanding noise rejection to prevent alternator whine and other noises. Optical Digital (Toslink) Inputs permit direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input. Analog and Digital Pre-Outs (pass-through or fully configurable): RCA Pre-Outs (4V RMS Max) and Optical (Toslink) Output at 24 bit/96 kHz Automatic turn-on options via signal-sensing or DC-offset sensing JLid™ System Command and Control with Networking Capabilities Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid™ accessories, including: DRC-100 / DRC-205 (Digital Remote Controllers): Offers convenient DSP preset selection and level adjustments from the driver’s seat. VXi-BTC Bluetooth® Communicator: Adds wireless connectivity for amplifier configuration from a compatible iOS® or Android® device.
 VXi-HUB Optical Network Hub: Provides network connectivity for up to six VXi amplifiers, allowing full-system DRC control and preset selection. Up to two VXi-HUBs can be daisy-chained to control up to ten VXi amplifiers. Specifications: Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 75 W RMS x 4 @ 2 Ω 100 W RMS x 4 Bridged @ 4Ω 200 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 60 W RMS x 4 @ 2 Ω 90 W RMS x 4 Bridged @ 4Ω 180 W RMS x 2 General Specifications Frequency Response 12 Hz - 21 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Digital Inputs) 101 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Digital Inputs) 81 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >100 / 50 Hz Damping Factor @ 2 Ω >50 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) Physical Specifications Height (H) 2.12 in / 54 mm Width (W) 9.02 in / 229 mm Depth (D) 6.62 in / 168 mm Net Weight 5.0 lb / 2.27 kg