Description
Included in this kit
This bundle includes 1x JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W, 1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable, and 1x JL Audio SB-GM-COEXT2G/10TW3: Stealthbox® for 2015-Up Chevrolet Colorado & GMC Canyon Extended Cab.
1x JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W - (XDM600/1)
JL Audio XDM600/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω | 400 W RMS x 1 |
@ 3 Ω | 500 W RMS x 1 |
@ 2 Ω | 600 W RMS x 1 |
@ 1.5 Ω | N/A |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω | 300 W RMS x 1 |
@ 3 Ω | 400 W RMS x 1 |
@ 2 Ω | 500 W RMS x 1 |
@ 1.5 Ω | N/A |
General Specifications
Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >1000 / 50 Hz |
Damping Factor @ 2 Ω | >500 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
Signal Processing
Filter Mode(s) | Low-Pass only |
Filter Slope(s) | 12/24 dB/octave |
Filter Frequency Range | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometer | Yes |
Filter Defeat Function | Yes |
Infrasonic Filter | 30 Hz, defeatable |
Bass Boost EQ | No |
Output Polarity Switch | No |
Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
Remote Bass EQ Boost Control | No |
Pass-Through Preamp Output | Buffered |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 8.52 in / 216 mm |
Depth (D) | 7.09 in / 180 mm |
Net Weight | 6.3 lb / 2.86 kg |
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)
JL Audio HD-RLC: Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
1x JL Audio SB-GM-COEXT2G/10TW3: Stealthbox® for 2015-Up Chevrolet Colorado & GMC Canyon Extended Cab - (SB-GM-COEXT2G/10TW3)
JL Audio SB-GM-COEXT2G/10TW3
Stealthbox® for 2015-Up Chevrolet Colorado & GMC Canyon Extended Cab
The Colorado/Canyon offers a great combination of real truck capabilities from within a compact platform. The Extended Cab version of this mid-size truck has limited back seat space for passengers and does not leave much room for a bulky subwoofer enclosure.
Fortunately, JL Audio’s Stealthbox® design team has arrived at a clever solution that mounts between the jump seats, while also creating separate storage spaces beneath each seat. Equipped with our innovative 10-inch TW3 thin-line subwoofer, this down-firing Stealthbox® features an all-fiberglass, sealed enclosure design and generates loads of great-sounding, deep, bass output.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs between and under rear jump seats. Requires removal of under-seat storage tray/cup holders and relocation of jack tools.
JL Audio 10TW3-D8
TW3 10-inch Subwoofer Driver (400 W, dual 8 Ω voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the new TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing subwoofer drivers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
- Very shallow mounting depth (3.25 / 3.50 Inches)
- No pole vent: permits mounting close to rear wall of enclosure.
- Very small sealed enclosure volume requirements
- Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
- DMA-optimized motor designs
- Patented “concentric tube” architecture
- Patented “floating cone attach method” technology
- Cast alloy frame
- Injection molded, mica-filled polypropylene cone
- Rubber surround
- Aluminum-alloy dust cap and rear cap with JL Audio logo
- Precision-built in USA with Global Components at JL Audio’s Miramar, Florida factory
10TW3 General Specifications
Continuous Power Handling (RMS) | 400 W |
Recommended Amplifier Power (RMS) | 200 - 400 W |
Nominal Impedance (Znom) | Dual 8 Ω |
10TW3 Parameters
Free Air Resonance (Fs) | 32.30 Hz |
Electrical “Q” (Qes) | 0.656 |
Mechanical “Q” (Qms) | 11.35 |
Total Speaker “Q” (Qts) | 0.62 |
Equivalent Compliance (Vas) | 0.700 cu ft / 19.82 L |
One-Way Linear Excursion (Xmax)* | 0.6 in / 15.2 mm |
Reference Efficiency (no) | 0.23% |
Efficiency (1 W / 1 m)** | 82.10 dB SPL |
Effective Piston Area (Sd) | 56.532 sq in / 0.0365 sq m |