Description
Included in this kit
This bundle includes 2x JL Audio OEM 12-Inch M7 Marine Infinite Baffle Subwoofer, RGB LED, Gloss White, Classic Grille - SKU: M7-12IB-C-GwGw-i-4, and 1x Clarion CMR-L1 Marine LED Light Controller.
2x JL Audio OEM 12-Inch M7 Marine Infinite Baffle Subwoofer, RGB LED, Gloss White, Classic Grille - SKU: M7-12IB-C-GwGw-i-4 - (OD-M7-12IB-C-GwGw-i-4)
JL Audio M7-12IB-C-GwGw-i-4 12-inch (300 mm) Marine Subwoofer Driver with Transflective™ LED Lighting, Gloss White Trim Ring, Gloss White Classic Grille, 4 Ω
Engineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.
Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.
M7-12IB is best used with amplifier power in the 200W – 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).
Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.
The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.
Specifications -
• Continuous Power Handling (RMS): 600 W
• Nominal Impedance (Znom): 4 Ω
• Nominal Diameter: 12.00 in / 300 mm
• Overall Diameter: 14.00 in / 356 mm
• Bolt Hole Circle Diameter: 12.813 in / 325 mm
• Frontal Grilles Protrusion*: 1.45 in / 37 mm
• Mounting Hole Diameter: 12.0625 in / 306 mm
• Mounting Depth: 7.94 in / 202 mm
• Driver Displacement: 0.148 cu ft / 4.19 L
Parameters -
• Free Air Resonance (Fs): 35.34 Hz
• Electrical “Q” (Qes): 0.856
• Mechanical “Q” (Qms): 10.389
• Total Speaker “Q” (Qts): 0.791
• Equivalent Compliance (Vas): 1.99 cu ft / 56.35 L
• One-Way Linear Excursion (Xmax)*: 0.73 in / 18.5 mm
• Reference Efficiency (no): 0.28%
• Efficiency (1 W / 1 m)**: 86.7 dB SPL
• Effective Piston Area (Sd): 80.54 sq in / 0.052 sq m
• DC Resistance (Re): 3.543 Ω
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.