Description
Included in this kit
This bundle includes 1x Kicker 48VCVR122 CompVR 12" single subwoofer in vented box, 2-ohm, 1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and 1x Kicker 47VK8 VK8 8AWG Complete Amplifier Wiring Kit w/2CH Interconnects.
1x Kicker 48VCVR122 CompVR 12" single subwoofer in vented box, 2-ohm - (48VCVR122)
Kicker 48VCVR122 12" CompVR Subwoofer in Vented Enclosure, 2-Ohm, 400w RMS
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake. KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts. A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.
This enclosure features tough MDF construction with head-duty internal bracing to make sure the only thing vibrating are your ears. The thick embroidered black carpet makes a statement of quality craftsmanship and sound, with front venting to further increase the output of these subwoofers. The pre-wired 2-Ohm terminals on the back make installation a breeze.
Key Features -
• SoloKon Cone System with Vented Back Bracing and Motor Cooling
• Red Stitched Surround for Unsurpassed Reliability
• Legendary KICKER Bass
• Front Venting for Smooth, Powerful Bass
• Extensive Internal Bracing and Thick MDF Construction
• Pre-Wired, Spring-Loaded, Two-Ohm Terminal
• Features the Best-in-Class CompVR Subwoofer
• Factory-Tuned Enclosure for Incredible Bass
• Great for SUVs, Hatchbacks and Car Trunks
VCVR12 Specifications -
• Woofer [in, cm] - 12, 30
• Impedance [Ohms] - 2
• Recommended Amp Power [watts RMS] - 400
• Peak Power Handling [watts] - 800
• Sensitivity [dB 1w/1m] - 95
• Enclosure Depth [in, cm] - 14-1/2, 36.8
• Enclosure Height [in, cm] - 16, 40.6
• Enclosure Width [in, cm] - 23, 58.4
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 47VK8 VK8 8AWG Complete Amplifier Wiring Kit w/2CH Interconnects - (47VK8)
Kicker VK8 8AWG Complete Amplifier Wiring Kit w/2CH Interconnects - 47VK6
Kicker V-Series Amplifier Wiring Kits -
• Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables
• K-Series Speaker Wire and Interconnect Cables
• Heavy-Duty AFS Fuse Holder and Fuse
• Insulated Crimp Connectors, Zip Ties and other Hardware
• One Convenient Kit with Everything that You Need
• All Cables are made with Pure OFC for Max Power Transfer and Superior Clarity
• Additional Year of Warranty When Purchased with a KICKER Amp
In the box -
• 17 ft 8 AWG red power wire
• 4 ft 8 AWG gray ground wire
• Fuse holder with 60 amp fuse
• 17 ft remote wire
• 16.4 ft RCAs
• 12 ft speaker wire
• 6 6" zip ties
• 8 AWG firewall grommet
• 1x butt connector
• 4x fork terminals
• 1x red fork terminal boots
• 1x black fork terminal boots
