Description
Kenwood's KSC-PSW8 compact powered enclosure fits under the seat in most vehicles, where it produces bass response that's equal to that of a larger subwoofer in your trunk. It offers a great solution for those who want to reinforce their low-frequency punch without losing a lot of room.
Features -
• Carefully selected thick voice coil and heat resistant parts
• Optimized Magnetic Circuit
• Newly designed damper to improve durability
• Equipped with wired remote control
• Compact powered enclosure with 8" subwoofer
• Built-in amplifier: 150 watts RMS power (250 watts maximum)
• Wired remote for control over: ○ Volume level ○ Variable low-pass crossover (50-125 Hz) ○ Selectable phase control (0°, 180°)
Box Contents -
• Powered subwoofer
• Power/signal wiring harness with 28" input cable (stereo RCA) / 16.25' power wire (14 AWG) / 5' ground wire (dual 18 AWG) / 16.25' turn-on lead (18 AWG)
• 10A ATO fuse in fuse holder (installed on power wire)
• Remote control with 16.25' cable (RJ-45 plug)
• 14' Speaker input wires (male/female bullet connectors on one end and RCA plugs on other end)
• 2 Mounting brackets
• Cable clamp
• 4 Self-tapping screws (M5 x 16mm)
• 4 Machine screws (M4 x 16mm)
• 2 Self-tapping screws (M3 x 10mm)
• Adhesive backed hook-and-loop pad
• Instruction Manual
• Warranty Sheet (US)
Features -
• Carefully selected thick voice coil and heat resistant parts
• Optimized Magnetic Circuit
• Newly designed damper to improve durability
• Equipped with wired remote control
• Compact powered enclosure with 8" subwoofer
• Built-in amplifier: 150 watts RMS power (250 watts maximum)
• Wired remote for control over: ○ Volume level ○ Variable low-pass crossover (50-125 Hz) ○ Selectable phase control (0°, 180°)
Box Contents -
• Powered subwoofer
• Power/signal wiring harness with 28" input cable (stereo RCA) / 16.25' power wire (14 AWG) / 5' ground wire (dual 18 AWG) / 16.25' turn-on lead (18 AWG)
• 10A ATO fuse in fuse holder (installed on power wire)
• Remote control with 16.25' cable (RJ-45 plug)
• 14' Speaker input wires (male/female bullet connectors on one end and RCA plugs on other end)
• 2 Mounting brackets
• Cable clamp
• 4 Self-tapping screws (M5 x 16mm)
• 4 Machine screws (M4 x 16mm)
• 2 Self-tapping screws (M3 x 10mm)
• Adhesive backed hook-and-loop pad
• Instruction Manual
• Warranty Sheet (US)
