Description
Alpine PWD-X5 4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer.
This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer. The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade.
Compact installation
The very compact measurement of only 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles.
Extensive sound tuning functions
Use the built-in 10-band Parametric EQ, digital time correction and digital crossover to tune the sound of your vehicle.
Wide connectivity options
You can connect the PWD-X5 to an Aftermarket radio using RCA inputs. If you have an original radio in your car that has nor RCA connections, you can connect it to the DSP amplifier using the high-power inputs.
Wired Remote Control
The remote control unit is connected with the DSP amplifier by USB.
Bluetooth Audio Streaming
If your original car stereo does not feature Bluetooth audio streaming, the PWD-X5 is yet again a great solution for you.
Get the Smartphone App
You can download the Alpine companion app for the PWD-X5 from Google Play and the Apple App Store free of charge.
Technical Specifications -
• Power output:
• Rated power: 25W*4+165W
• peak power: 50W*4+240W
• Signal-to-noise ratio: ≥80dB
• Bass boost: -12dB~+12dB
• Frequency response: 20Hz~20KHz
• Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
• Phase selection: 0°/180°
• Remote ON: DC high-level /REM input activation
• Power source: DC 14.4V (9V~16V) negative ground
• Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
• Activate REM output: +12V activation voltage output (0.5A)
• Measurements: 350mm (L) *245mm (W) *80mm (H)
This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer. The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade.
Compact installation
The very compact measurement of only 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles.
Extensive sound tuning functions
Use the built-in 10-band Parametric EQ, digital time correction and digital crossover to tune the sound of your vehicle.
Wide connectivity options
You can connect the PWD-X5 to an Aftermarket radio using RCA inputs. If you have an original radio in your car that has nor RCA connections, you can connect it to the DSP amplifier using the high-power inputs.
Wired Remote Control
The remote control unit is connected with the DSP amplifier by USB.
Bluetooth Audio Streaming
If your original car stereo does not feature Bluetooth audio streaming, the PWD-X5 is yet again a great solution for you.
Get the Smartphone App
You can download the Alpine companion app for the PWD-X5 from Google Play and the Apple App Store free of charge.
Technical Specifications -
• Power output:
• Rated power: 25W*4+165W
• peak power: 50W*4+240W
• Signal-to-noise ratio: ≥80dB
• Bass boost: -12dB~+12dB
• Frequency response: 20Hz~20KHz
• Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
• Phase selection: 0°/180°
• Remote ON: DC high-level /REM input activation
• Power source: DC 14.4V (9V~16V) negative ground
• Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
• Activate REM output: +12V activation voltage output (0.5A)
• Measurements: 350mm (L) *245mm (W) *80mm (H)
