Description
Kicker 44KXMA400.4 Amplifier
The KXM 400-watt four-channel amplifier is flexible enough to be a full system solution, or serve as the power for your mid and high-range speakers. KickEQ+ā¢ delivers as much as an 18dB of extra bump with a simple turn of the knob, and powerful 24dB crossover is also included to letting you quickly tune your system to perfection.
Features:
- Class D Power Plant
- Gain Control With "Optimal Input" Indicator
- FIT2ā¢ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+ā¢ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
Specifications
| RMS Power [Watts] |
| @ 14.4V, 4ā¦ stereo, ā¤ 1% THD+N: 50 x 4
@ 14.4V, 2ā¦ stereo, ā¤ 1% THD+N: 100 x 4 @ 14.4V, 4ā¦ bridged mono, ā¤ 1% THD+N: 200 x 2 |
| Length [in, cm] |
| 11-3ā16 , 28.4 |
| Height [in, cm] |
| 2-ā , 5.5 |
| Width [in, cm] |
| 8-5ā16 , 21 |
| Frequency Response [Hz] |
| 10Hzā20kHz |
| Input Sensitivity: |
| 250mVā10V |
| Signal-to-Noise Ratio |
| 95dB |
| Selectable Electronic Crossover |
| Amp 1: OFF/HP/LP; Variable 10ā5,000Hz with X10 switch
Amp 2: OFF/HP/LP/BP; Variable HP, 10ā500Hz; Variable LP, 40ā5,000Hz with 10X switch Slope: 24dB/octave |
| KickEQā¢ Bass Boost |
| 0-18dB @ 40Hz |
| CEA Power |
| 50 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
| CEA Signal-to-Noise Ratio |
| -75dB CEA-2006B (ref: 1W, A-weighted) |
44 KX Family Features
Next Level Knob
A revolutionary wireless remote that goes way beyond a simple bass knob. Control as many as four amplifiers simultaneously, including mono KX amps and the bass channel of the KXA800.5. Monitor and control vital functions of the amp including clipping, gain, phase, bass boost and more.
Test Tones
In any audio system, the goal is to reach maximum input and output levels without distortion or clipping. Sometimes, without expensive or complicated equipment like an oscilloscope, this can be a daunting task for a would-be-audiophile install. Thankfully, the engineers at KICKER have taken the guesswork, and hassle, out of matching the output voltage of your source unit to the amplifier. To begin, youāll need to download the KICKER test tones from our Knowledge Base HERE.
SHOCwaveā¢ Reveals The Bass
The SHOCwaveā¢ Bass Restoration processor reveals the depth and power hidden in your digital recordings. This advanced processor is built into all mono and five-channel KX amplifiers, and easily controlled with the wireless KXARC remote (included).
Power Plant
You want high efficiency, monster wattage and small amp size. One ohm stability* and Class D construction means KICKERĀ® amps fit nearly anywhere, with up to 2,400 watts of bone-shaking power.
*Mono models and subwoofer output of KXA800.5.
KickEQ+
Enjoy an enormous 18dB of variable bass boost with KickEQ+ā¢. A simple turn of the knob gives you the extra bump youāve been looking for.
Use Any Radio
KX Amplifiers come loaded with FIT2ā¢ (Fail-Safe Integration Technology) advanced circuitry for superior clarity and dependability that works with nearly every radio on the planet.
44 KX Amplifier Videos
