Description
Included in this kit
This bundle includes an Alpine SS-SB12 Single 12” S-Series Shallow Preloaded Subwoofer Enclosure, and an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms.
1x Alpine SS-SB12 Single 12” S-Series Shallow Preloaded Subwoofer Enclosure - (SS-SB12)
With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.
DESIGNED FOR TIGHT SPACES
Now you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.
POWERFUL PERFORMANCE
The SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.
ADJUSTABLE MOUNTING OPTIONS
Four adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.
PRECISE BASS CONTROL
Alpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and effcient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.
FEATURES
Optimal Sealed Cabinet Quality
Preloaded 12” S-Shallow Subwoofer
Neodymium Magnet
Front-Mounted Neodymium Motor
Alpine Gen2 DD Linear Magnetic Circuit
Rugged Polymer Enclosure Cabinet
Adjustable, Foam-padded Mounting Brackets for Flexible Installation & Reduced Vibration
What's in the Box:
Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer
(x4) Mounting Brackets
Owner’s Manual
Warranty Information
Online product registration information
TECH SPECS
Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)
Power Handling: 300W RMS
Frequency Response: 30Hz-200Hz
X-Max:11mm 1-Way Linear
Nominal Impedance: 2Ω
Copper Voice Coil: 2” (50.0mm)
Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)
1x Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms - (KTA-30MW)
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 300W x 1 D.P.P. (2Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 200W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch input
The KTA-30MW is perfect for when you want to boost your sound system but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30MW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t. The KTA-30MW can be tucked away under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
