Description
Included in this kit
This bundle includes 2x Alpine SPV-10TW-WRA Weather-Resistant 1” Component Tweeters for 2007+ Wrangler JK/JL & Gladiator JT, 1x Alpine i407-WRA-JK 7-Inch Restyle Dash System Compatible with Apple CarPlay and Android Auto for Jeep Wrangler 2007-2017, 1x Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU, and 1x Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms.
2x Alpine SPV-10TW-WRA Weather-Resistant 1” Component Tweeters for 2007+ Wrangler JK/JL & Gladiator JT - (SPV-10TW-WRA)
Whether you’re driving with the top on or off, the SPV-10TW-WRA captures the high frequencies so you can experience music detail even over the wind and traffic noise. Plus, the weather-resistant tweeters ensure an uninterrupted music experience no matter the driving conditions. The SPV-10TW-WRA utilizes the factory speaker locations on the 2007 – Up Jeep® Wrangler and Jeep® Gladiator and includes vehicle-specific harnesses and connectors for a true plug-and-play installation experience.
Weather-Resistant 1” Component Tweeters
Teteron Dome Tweeter
Plug-and-Play Installation: Utilizes Factory Locations and Vehicle-specific Harnesses/Connectors
Crossover with two tweeter level output options: 0dB (flat) for “Tombstone” on-axis applications and +3dB for in-dash off-axis applications
Compatible with 2007 – Up Jeep® Wrangler and Jeep® Gladiator
What's in the Box:
(2) 1” Component Tweeters
(2) OEM-fit Mounting Adapters
(2) In-line Crossover Networks w/ OEM connectors for Plug ‘n Play Installation
(2) Alpine logo badges for Tweeter Grilles
Owner’s Manual
Specifications:
Power Handling: 75W RMS / 225W Peak
Frequency Response: 2kHz - 22kHz
Nominal Impedance: 4Ω
Diaphragm: 1”
1x Alpine i407-WRA-JK 7-Inch Restyle Dash System Compatible with Apple CarPlay and Android Auto for Jeep Wrangler 2007-2017 - (i407-WRA-JK)
Alpine i407-WRA 7-Inch Restyle Dash System Compatible with Apple CarPlay and Android Auto for Jeep Wrangler (2007-2017)
Included all wiring, dash trims, and harnesses needed to install into 2007-2017 Jeep Wranglers
Contains: iLX-407 Radio, WRA-i407-BKTS Bracket, ALP-MRR4 Harness, ALP-HRN-WRA4 Harness
Transform the driver experience in your JK Wrangler with the Alpine i407-WRA-JK 7in In-Dash Digital Receiver. This purpose built, Jeep specific kit, was designed to replace the underperforming factory stereo with a cutting-edge Apple CarPlay & Android Auto compatible head unit. The massive 7” VGA touch screen features hands-free calling, track listings, SMS/text notifications, and two-finger swipe technology. In addition to its standard features, a built-in iDatalink Maestro unit allows the i407-WRA-JK to display vehicle diagnostics, customizable gauges, and even clear check engine codes. With each i407-WRA-JK, Alpine includes a dash bezel that gives the digital receiver a smooth, factory look.
Features -
• Includes iDatalink Maestro for seamless vehicle integration, allowing you to keep all of the factory functionality and expanding upon it.
• Compatible with CarPlay
• Android Auto™ compatible
• 1 HDMI Input
• 7-inch VGA Display with anti-glare capacitive touch screen
• Audio, video and Bluetooth feature set
• Touch screen control of truck accessories via KAC-001 External Accessory Control Module (sold separately)
• 4-way swipe action graphical interface control
• Front and Rear Camera Inputs
• Dual Camera Inputs enable front and rear camera capability to assist visibility and parking.
• HD Radio Tuner built-in
• Made for iPod and iPhone
• 5-Band parametric EQ/6-Channel time correction/MediaXpander.
• Power pack ready.
• KTA-200M or KTA-450 Power Stack Compatible.
• SiriusXM-Ready™ (SXV300 Connect Vehicle Tuner Kit sold separately, SiriusXM subscription required)
• Pandora control from iPhone and Android smartphones
• FLAC/MP3/WMA/AAC/HE-AAC music playback via USB
• BT Plus Bluetooth® wireless technology with audio streaming
1x Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU - (SBV-10-WRA)
OVERVIEW 10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness Nominal Impedance: 2 ohm Frequency Response: 45-200Hz The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers SMART USE OF SPACE WITH EASY INSTALLATION When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger’s seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) WRANGLER-READY BASS Enjoy impactful bass, with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends. WEATHER RESISTANT Driving with the top off is part of the fun of owning a Wrangler, but you sometimes get caught off-guard with the top down and inclement weather. The SBV-10-WRA is weather resistant and rated IP66, so it’s protected from total dust ingress and water from any direction.
1x Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms - (KTA-30MW)
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 300W x 1 D.P.P. (2Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 200W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch input
The KTA-30MW is perfect for when you want to boost your sound system but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30MW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t. The KTA-30MW can be tucked away under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
