Included in this kit

---

This bundle includes 2x JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single, a JL Audio C3-100ct: 1-inch (25 mm) Component Tweeters, Pair, and a JL Audio XD400/4v2:4 Ch. Class D Full-Range Amplifier 400 W.

2x JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single - (C5-570cw-Single)

JL Audio C5-570cw-Single 5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer, Single

5 x 7 / 6 x 8-inch (125 x 180 mm) Component Woofer

Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio's engineers have put in the time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals rock.

C5-570cw component woofers are built using Kurt Müller cones and suspensions with die-cast alloy baskets. This woofer benefits from JL Audio's vast woofer design experience and advanced modeling systems.

Passive crossover networks are not included with C5 component drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK® 88 or D8, and a dedicated amplifier channel for each C5 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.

Design Bandwidth:

With 48 dB/octave filters: 50 Hz - 5 kHz
With 24 dB/octave filters: 60 Hz - 5 kHz
With 12 dB/octave filters: 70 Hz - 5 kHz

Sonic character: Smooth and balanced

Sold individually, with one electroformed JL Audio logo. No woofer grilles are included (or available) for this speaker.
Made in Germany.

1x JL Audio C3-100ct: 1-inch (25 mm) Component Tweeters, Pair - (C3-100ct)

JL Audio C3-100ct - 1-inch (25 mm) Silk Dome Tweeters, Sold as a pair.

The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.

The C3 component tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be installed coaxially onto the C3 woofers using the fixtures included with the C3 Component / Coaxial Systems.

Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C3-100ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.

Sonic character: Clean and Powerful

• Continuous Power Handling (RMS) - 75 W
• Peak Music Power* - 225 W
• Recommended Amplifier Power (RMS) - 25 - 150 W / Ch.
• System Efficiency - 90.0 dB @ 1 W / 1 m
• System Nominal Impedance - 4 Ω
• System Frequency Response - 4 kHz - 25 KHz ± 3 dB

1x JL Audio XD400/4v2:4 Ch. Class D Full-Range Amplifier 400 W - (XD400/4v2)

JL Audio XD400/4v2: 4 Ch. Class D Full-Range Amplifier 400 W

4-Channel Class D Full-Range Amplifier, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Use the XD400/4v2 in combination with our XD600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat. Or, use the XD400/4v2 by itself to power two satellites, plus a subwoofer. With XD's, the possibilities are endless.

The XD400/4v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

The XD400/4v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.