Description
Included in this kit
This bundle includes 1x JL Audio OEM 10-Inch M6 Marine Infinite Baffle Subwoofer, RGB LED, Gloss White, Classic Grille - SKU: M6-10IB-C-GwGw-i-4, and 1x Clarion CMR-L1 Marine LED Light Controller.
1x JL Audio OEM 10-Inch M6 Marine Infinite Baffle Subwoofer, RGB LED, Gloss White, Classic Grille - SKU: M6-10IB-C-GwGw-i-4 - (OD-M6-10IB-C-GwGw-i-4)
JL Audio M6-10IB-C-GwGw-i-4
JJL Audio OEM 10-Inch M6 Marine Infinite Baffle Subwoofer, RGB LED, Gloss White, Classic Grille - SKU: M6-10IB-C-GwGw-i-4
M6 Loudspeakers fulfill JL Audio’s commitment to raise the bar with each product generation. The JL Audio engineering team has completely reinvented the premium marine loudspeaker, with major improvements in performance, precision and durability. Offered in multiple sizes and cosmetic options, most models are also available with a brilliant, new lighting technology.
Advanced Subwoofer Technologies
Offered in 8-inch and 10-inch diameters, M6 subwoofers continue JL Audio’s tradition of building low-frequency drivers that impress, not only with their output capability, but also with the quality and balance of their sound. FEA-optimized motor and suspension designs are optimized for infinite-baffle installation (IB models), or for installation into small sealed enclosures (W models). Choose the right one for your application and it will reward you with powerful, low-distortion sub-bass that takes your marine audio experience to a higher level.
Transflective™ LED Illumination
Optional on most M6 models is JL Audio’s Transflective™ LED technology. By emitting light from multiple LEDs through our specially engineered cone material, this patent-pending breakthrough delivers a beautiful cone illumination effect, with no hot spots or reflections on the cone surface.
Choose from seven fixed lighting colors or control the color and intensity of the lighting actively using a lighting controller accessory (sold separately). Separate 12V wiring is required to power the illumination.
Physical Specifications
| Nominal Diameter | 10 in / 250 mm |
| Outer Diameter | 10.75 in / 273 mm |
| Bolt Hole Circle | 9.7 in / 247 mm |
| Frontal Grille Protrusion | 1.66-Inches for Classic Grille, 1.66-Inches for Sport Grille |
| Mounting Hole Diameter | 8.875 in / 225 mm |
| Net Weight | 12.6 lbs / 5.7 kg |
| Driver Displacement | .052 ft^3 / 1.47 liters |
Subwoofer Parameters
| Free Air Resonance (Fs) | 43.76 Hz |
| Electrical “Q” (Qes) | 0.907 |
| Mechanical “Q” (Qms) | 11.315 |
| Total Speaker “Q” (Qts) | 0.840 |
| Equivalent Compliance (Vas) | 0.98 ft3 / 27.75 litres |
| One-way, Linear Excursion (Xmax) | 0.52 in / 13.2 mm |
| Efficiency (1W/1m) | 86.1 dB SPL |
| Effective Piston Area (Sd) | 50.11 in² / 0.0323 m² |
| DC Resistance (Re) | 4.543 ohm |
| Nominal Impedance | 4 Ohm |
| Infinite Baffle Use | Yes |
| Enclosure Use | Yes (Sealed & Ported) |
| Power Handling (continuous) | 250W |
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.