Description
Included in this kit
Kenwood P-XW1221DHP Dual 12" High Power Excelon Subwoofers in a Vented Enclosure and includes a KAC-9106D 2000 Max Power Class D Mono Amplifier - This bundle includes Kenwood P-XW1221DHP Dual 12" Vented Enclosure, 1000W RMS Power, Kenwood KAC-9106D Class D Mono Power Amplifier with Variable LPF, 2000W Max power, a pry kit, and a Creative Audio coozy.
Kenwood P-XW1221DHP Dual 12" Vented Enclosure, 1000W RMS Power
Features -
ā¢ Peak Power 2000W
ā¢ RMS Power 1000W
ā¢ PP Cone with Dual Area Cap
ā¢ Stress Controlled Spider
ā¢ 2Ī© Impedance
ā¢ Steel Mesh Grilles Included
ā¢ Injection Polypropylene
ā¢ Dual Area Cone
ā¢ Closed Yoke with Advanced Airflow Control
ā¢ Aluminum Bobbin
Enclosure Specifications -
ā¢ Slant Back Design with Flared Port & Down Firing Capability
ā¢ 5/8"MDF Construction with 3/4" MDF Baffle Board
ā¢ 8AWG-ready Nickel-plated Spring Posts
Kenwood KAC-9106D Class D Mono Power Amplifier with Variable LPF, 2000W Max power
Specifications
Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response: 20Hz-200Hz (+0dB, -3dB)
Class D
Input Impedance: 10k ohm
Speaker Impedance: 4Ī© (2Ī© to 8Ī© allowable)
Audio Section
Low-Pass Filter: Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
Infrasonic Filter: Built in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct)
Bass Boost: Built in Bass Boost Control (40Hz, 0dB-+18dB)
RCA Input Sensitivity: 0.2[V] - 5.0 [V]
Speaker Level: Input Sensitivity: 4.0[V] - 12.0 [V]
Terminals
Battery & Ground: Screw Type Terminal Block (Ni) (M6)
Speaker Output: Screw Type Terminal Block (Ni) (M4)
Line In: RCA (Ni)
Line Out: RCA (Ni)
Speaker Input: JST Connector
General
Dimensions(WxHxD): 335 [mm] x 56 [mm] x 192 [mm], 13-3/16 inch x 2-3/16 inch x 7-9/16 inch
Weight(kg): 2.8 [kg] 6.2 [lbs]
Operating Voltage: 14.4Vļ¼11-16V allowableļ¼ [V]
Current Consumption: 65 [A]