Description
Included in this kit
This bundle includes 1x Kenwood KFC-1666S 6-1/2" 2-way Speaker System, 300W Max Power, 1x Kenwood KFC-6966S 6x9" 3-Way Speaker System, 400W Max Power, and 1x Kenwood KMM-BT332U Bluetooth USB single DIN Media Receiver (No CD) with Alexa.
1x Kenwood KFC-1666S 6-1/2" 2-way Speaker System, 300W Max Power - (KFC-1666S)
The KFC-1666S 6-1/2" 2-way speakers feature polypropylene cones that will enrich your music with solid midbass oomph and dynamic midrange, while the 1" balanced-dome tweeters will bring new life to the high range. Kenwood also includes sharp-looking grilles in case you're doing a custom installation in your vehicle. Best of all, you can safely power these with your car stereo and still enjoy your music the way it was meant to be heard, with clarity and emotion.
Features -
ā¢ 6-1/2" 2-way speakers (pair)
ā¢ polypropylene woofer with treated cloth surround
ā¢ 1" PEI balanced dome tweeter
ā¢ grilles included
ā¢ handles up to 30 watts RMS (300 watts peak power)
Box Contents -
ā¢ Two 2-way speakers
ā¢ 2 Grilles
ā¢ Two 12" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other)
ā¢ Eight 1" Screws
ā¢ 8 Speed clips
ā¢ Specifications and template on the box
1x Kenwood KFC-6966S 6x9" 3-Way Speaker System, 400W Max Power - (KFC-6966S)
The KFC-6966S 6"x9" 3-way speakers feature polypropylene cones that will enrich your music with solid midbass oomph and dynamic midrange, while the 1" balanced-dome tweeters and ceramic supertweeters will bring new life to the high range. Kenwood also includes sharp-looking grilles in case you're doing a custom installation in your vehicle. Best of all, you can safely power these with your car stereo and still enjoy your music the way it was meant to be heard, with clarity and emotion.
Features -
ā¢ Sensitivity: 92 dB / W / m
ā¢ Frequency Response: 30 Hz - 22k Hz
ā¢ Cutout Diameter: 6-1/16 , 8-3/4inch
ā¢ Mounting Depth: 3inch
ā¢ Gross Weight: 5.1lbs
ā¢ Weight of Magnet (Woofer): 0.4lbs
Electrical -
ā¢ Impedance (Ī©) 4Ī©
ā¢ Peak Input Power (W) 400W
ā¢ RMS Input Power (W) 45W
ā¢ Sensitivity (dB at 1m) 91dB
ā¢ Frequency Response (Hz) 35-20000Hz
Tweeter -
ā¢ Diaphragm: Cone/Silver
ā¢ Sizer: 50mm/2 in
ā¢ Magnet Material: Ferrite
1x Kenwood KMM-BT332U Bluetooth USB single DIN Media Receiver (No CD) with Alexa - (KMM-BT332U)
Features:
255 Segment 1.5 Line Text Display
Amazon Alexa Ready
Bluetooth Direct Access Button
Variable Color Illumination
13Band EQ & Digital Time Alignment
Front USB & AUX IN
3 Preouts 2.5V
Music Mix
Up to 5 BluetoothĀ® devices can be paired to the receiver at the same time. You can enjoy audio streaming just by switching the devices with your friends or family.
Dual Phone Connection
While you are connected through Bluetooth, with a touch of a button you can switch between two phones.
Remote App
A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).
Graphic EQ / Digital Time Alignment
13-Band equalizer and DTA gives optimal tuning enhancements for listeners.
Drive EQ
Boosts specific frequencies in the audio signal to overcome the negative impact of road noise.
Variable Color Illumination
Bright variable color LEDs can be adjusted to match any color dash lighting.
Short Chassis
With receivers shorter in depth than any of our previous models, installation is made easier in a wider range of cars.
Specifications:
FM
Frequency Range(MHz) (Frequency step): 87.9MHz to 107.9MHz (200kHz)
Usable Sensitivity S/N:30dB: 8.2dBf (0.71Ī¼V/75Ī©)
Quieting Sensitivity DIN S/N:46dB: 17.2dBf (2.0Ī¼V/75Ī©
Frequency Response (Ā±3.0dB): 30Hz to 15kHz
S/N(dB): 64.0dB(MONO)
Stereo Separation: 40dB(1kHz)
MW (AM)
Frequency Range(kHz) (Frequency step): 530kHz to 1700kHz (10kHz)
Usable Sensitivity (S/N 20dB): 29dBĪ¼ (28.2Ī¼V)
Preout Level(mV)/Load: -Unbalanced 2,500mV/10kĪ©
Preout Impedance(Ī©): =<600Ī©
Speaker Impedance(Ī©): 4 to 8Ī©