Description
Included in this kit
This bundle includes a Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and 2x Kicker 50CWCD84 CompC 8" Subwoofer Dual Voice Coil 4-Ohm.
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
2x Kicker 50CWCD84 CompC 8" Subwoofer Dual Voice Coil 4-Ohm - (50CWCD84)
8" CompC 4 Ohm DVC
The dual-voice-coil CompC Subwoofers make wiring easy with a pair of spring-loaded terminals, for easy optimizing of a CX-Series Amplifier. Big power and big bass are easy to get.
Features:
Dual Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength Spiralead™ Tinsel Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals
*The CompC 8-Inch Subwoofer works best with a sealed or ported enclosure and 200 watts of recommended power. See below for more details.
Specifications
Size [in, cm]
8, 20
Impedance [OHMS]
4 DVC
Peak Power [watts, per ANSI/CTA-2031-A]
400
Recommended Amplifier Power [watts RMS]
100-200
Frequency Response [Hz]
30-500
Sensitivity [dB 1w/1m]
83.6
Mounting Depth [in, cm]
4-3/16, 10.5
Mounting Diameter [in, cm]
6-15/16, 17.7
Max Rec Sealed Box Vol [cu. ft, liters
1.2, 34
Min Rec Sealed Box Vol [cu. ft, liters
0.5, 14.2
Max Rec Vented Box Vol [cu. ft, liters)
1.2, 34
Min Rec Vented Box Vol [cu. ft, liters]
0.66, 18.7
