Description
Included in this kit
This bundle includes a JL Audio MM105 - MediaMaster IP67 Weatherproof 4-Zone Premium Source Unit with Full-Color LCD Display, 12-Channel 4-Volt Preamp Outputs, a JL Audio XDM800/8 XDM Series 8-Channel Class-D Full Range Car/Marine Amplifier, 800 W, and 2x JL Audio 6.5-Inch M6 Marine Coaxial Speaker System, Gloss White, Classic Grille - SKU: M6-650X-C-GwGw.
1x JL Audio MM105 - MediaMaster IP67 Weatherproof 4-Zone Premium Source Unit with Full-Color LCD Display, 12-Channel 4-Volt Preamp Outputs - (MM105)
Enjoy great audio wherever your adventures might take you, with the MediaMaster 105, a Premium Source Unit designed to withstand anything Mother Nature can dish out. This full-featured source unit delivers top-flight sound performance and advanced audio features specifically designed for marine and powersports applications. Its rugged, weatherproof (IP67 rated) chassis houses an ultra-bright, 3.5-inch full-color LCD display, with separate Day/Night lighting themes for outstanding visibility, even in bright sunshine. When in motion, you will also appreciate the clean user interface with big text and large backlit controls.
Because sound quality is our top priority, the MM105 is not equipped with an with an internal amplifier designed to drive loudspeakers directly. Instead , it offers twelve channels of audiophile-quality, preamp level outputs to deliver crystal-clear signals to high quality marine amplifiers. These are deployed via four configurable, nameable audio zones, each with its own set of independent control options, making the MM105 adaptable to a wide range of system types. On-the-fly, level controls make adjusting each or all audio zones a breeze, while a useful volume limit feature ensures that nobody gets blasted inadvertently. All zones feature our Zero-Clipping audio circuit design, with self-limiting tone controls to keep the audio clean at high listening levels, reducing the likelihood of speaker damage.
General Specifications -
ā¢ Input Operating Voltage: 10 - 15.9 VDC
ā¢ Standby Current Draw: 120 mA
ā¢ Operating Current Draw: 1.5A
ā¢ Recommended Fuse Value: 5A
ā¢ Remote Turn-On Capacity: 500 mA (max)
ā¢ Operating Temperature Range: -4F to +158F (-20C to +70C)
ā¢ Display Size/Type: 3.5-inch / TFT LCD backlighted
ā¢ Display Resolution: 320 x 480
ā¢ Output Channels: One stereo pair and mono subwoofer RCA plugs per zone
ā¢ Output Zones: Relative, Absolute, Fixed or Off
ā¢ Maximum Output Voltage: 4V RMS (Relative or Absolute), Selectable 4V/2V/1V RMS (Fixed)
1x JL Audio XDM800/8 XDM Series 8-Channel Class-D Full Range Car/Marine Amplifier, 800 W - (XDM800/8)
JL Audio XDM800/8 8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 Ī© / 75 W x 8 @ 4 Ī© - 14.4V
The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexDā¢ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.
Here are a few examples of how the XDM800/8 can be used:
- Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
- Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ī©
- Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ī©, plus two 4Ī© subwoofers with 200 W each
- Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ī©, plus four 4Ī© speakers with 75 W each
- Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ī© + rear speakers with 75 W x 2
- Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ī©, plus two 4Ī© subwoofers with 200W each
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ī© | 75 W RMS x 8 |
@ 2 Ī© | 100 W RMS x 8 |
Bridged @ 4Ī© | 200 W RMS x 4 |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ī© | 60 W RMS x 8 |
@ 2 Ī© | 90 W RMS x 8 |
Bridged @ 4Ī© | 180 W RMS x 4 |
General Specifications
Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ī© | >150 / 50 Hz |
Damping Factor @ 2 Ī© | >75 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 80 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
Filter Mode(s) | Low-Pass or High-Pass |
Filter Slope(s) | 12 dB/octave |
Filter Frequency Range | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometers | Yes |
Filter Defeat Function | Yes |
Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
Remote Level Modes | 2 or 4 or All Channels |
Channel Input Mode Switch | Yes (2/4/6/8 ch.) |
Pass-Through Preamp Output | None |
Source Channel Selection for PreOuts | N/A |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 14.73 in / 374 mm |
Depth (D) | 7.09 in / 180 mm |
2x JL Audio 6.5-Inch M6 Marine Coaxial Speaker System, Gloss White, Classic Grille - SKU: M6-650X-C-GwGw - (M6-650X-C-GwGw)
JL Audio M6-650X-C-GwGw
JL Audio 6.5-Inch M6 Marine Coaxial Speaker System, Gloss White, Classic Grille - SKU: M6-650X-C-GwGw
M6 Loudspeakers fulfill JL Audioās commitment to raise the bar with each product generation. The JL Audio engineering team has completely reinvented the premium marine loudspeaker, with major improvements in performance, precision and durability. Offered in multiple sizes and cosmetic options, most models are also available with a brilliant, new lighting technology.
Coaxial Speaker Technology
Every M6 coaxial loudspeaker starts with a long-excursion woofer designed with JL Audioās proprietary motor, suspension and cone modeling systems to yield superior frequency response, smooth mid-range dispersion and linear performance at all listening levels. JL Audioās acoustics laboratory in Miramar, Florida performs extensive testing on multiple generations of prototypes to refine every design and extract maximum performance.
Matching Silk-Dome Tweeters
Since the different size woofers in the M6 coaxials have different upper frequency response limits, each size pairs with its own specially designed, matching silk dome tweeter (0.8, 1.0, or 1.25-inch diameter). Each of these tweeters is precisely tuned via a rear cavity that optimizes its mid-range extension to seamlessly transition with its matching woofer. The result is smooth, evenly dispersed sound throughout the critical crossover region, making the overall sonic presentation clean and clear.
Advanced Built-In Crossover Networks
Crossover networks are a critical part of the M6 coaxial speakersā acoustic design and are considerably more sophisticated than those used in most marine coaxial speakers. The M6-650X employs a 1st order low-pass and 2nd order high-pass filter, while the M6-770X and M6-880X apply a 2nd order low-pass and 3rd order high-pass filter. Each crossover network also employs an electronic tweeter protection circuitto minimize the possibility of tweeter failure.
The multiple components required inthese crossovers are laid out on a ring-shaped circuit board that is built into each speakerās terminal assembly, ensuring that the crossover is secure and protected from the elements.
General Specifications
Continuous Power Handling (RMS) | 75 W |
Recommended Amplifier Power (RMS) | 25 - 150 W / Ch. |
System Efficiency | 89.5 dB @ 1 W / 1 m |
System Nominal Impedance | 4 Ī© |
System Frequency Response | 55 Hz - 25 KHz Ā± 3 dB |
Coaxial Physical Specifications
Frame Outer Diameter (A) | 6.90 in / 175 mm |
Bolt Hole Circle Diameter (B) | 6.13 in / 156 mm |
Frontal Grille Protrusion | 0.94-Inches for Classic Grille, 1.02-Inches for Sport Grille |
Mounting Hole Diameter (E) | 5.00 - 5.25 in / 127 - 133 mm |
Mounting Depth (F) | 3 in / 76 mm |