Description
Included in this kit
This bundle includes a JL Audio MM50 - Weatherproof marine source unit with full color LCD display - 25 Watts x 4 @ 4 ohm, 2x JL Audio M3-770X-S-Gw-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gloss White Sport Grilles, a Clarion CMR-L1 Marine LED Light Controller, and a JL Audio XDM800/8 XDM Series 8-Channel Class-D Full Range Car/Marine Amplifier, 800 W.
1x JL Audio MM50 - Weatherproof marine source unit with full color LCD display - 25 Watts x 4 @ 4 ohm - (MM50)
Engineered for real-world marine duty
ā¢ Weatherproof (IP66 rated) design and construction to withstand the elements
ā¢ Easy-to-read, high-brightness, 2.8-inch full-color LCD display with separate day/night lighting and display themes
ā¢ Intuitive interface with large, easy-to-use backlit controls for marine applications
ā¢ Independent user settings for display brightness, button brightness and remote brightness
Flexible zone controls give you complete command of your marine listening experience
ā¢ 6-channels of audiophile quality, 4V RMS preamp level outputs from two independent main zones, plus a dedicated subwoofer zone; all zones feature a zero-clipping audio circuit design, with self-limiting tone controls to prevent speaker system damage.
ā¢ Configurable Master Volume Control with independent feature/control options:
- Level Controls: Manage volume levels, together or individually, at any time. A fixed output mode is also available.
- Tone Controls: Bass, Midrange, Treble and Balance, independent or linked with Zone 1
- Rename Zone: Customize the names of each main zone or select from a list
- Max Volume Limit: Set a custom volume level limit for each main zone
ā¢ Built-in amplifier generates 100 watts of high-fidelity output (25W RMS x 4) to power two main zones
ā¢ Both main zone output types (speaker and preamp level) include a high-pass crossover feature with selectable frequency selection (off/60/80/100/150 Hz)
ā¢ Subwoofer zone outputs equipped with a 500 Hz low-pass crossover
Built for todayās modern media with multiple connectivity options
ā¢ Digital AM/FM tuner with RDS (Radio Data System) display info, where available
ā¢ Store up to 18 of your favorite AM/FM stations
ā¢ BluetoothĀ® streams top-quality audio from compatible devices
ā¢ USB 2.0 direct-digital connection accesses music files on your USB storage device or compatible iPhoneĀ®, plus 2.1A USB charging output
ā¢ Auxiliary inputs accept audio signals from a wide range of audio sources
ā¢ NMEA 2000Ā® Certified - MFD (Multi-Function Display) control functionality using applicable network cables and connectors (sold separately).
ā¢ Customizable naming displayed on BluetoothĀ® devices and MFDs
ā¢ Three remote controller options: (each sold separately)
2x JL Audio M3-770X-S-Gw-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gloss White Sport Grilles - (M3-770X-S-Gw-i)
JL Audio M3-770X-S-Gw-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gloss White Sport Grilles
7.7-inch coaxial system with 0.75-inch (19 mm) marine silk dome tweeters, 70W, 4 ohms
M3 Marine Coaxial Speakers - High-performance sound, engineered for real marine duty
Truly Engineered for Marine Duty
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.
Outstanding Sound Quality
ā¢ Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments.
ā¢ Long-excursion, high-efficiency woofers and treated silk dome tweeters deliver superior output capability with clear, high frequency detail.
ā¢ Integrated 2nd order, high-pass filter on tweeters, with solid-state protection circuit to minimize the possibility of tweeter failure.
Versatile Power Requirements
ā¢ Suitable for use with standard marine head-unit power.
ā¢ Designed to benefit with quality amplification, such as the JL Audio marine amplifiers.
Choose Your Look
ā¢ Available in two grille styles: āClassicā or āSportā, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
ā¢ Allows you to match the look of the speakers to the theme of the boat interior.
Built-In RGB LED Lighting
Included on this Sport grille model, multi-color LEDs are embedded within each speaker grille to produce vibrant accent lighting.
Choose from seven fixed-wiring lighting colors or connect a lighting controller accessory (sold separately) for adjustable control. (Separate 12V wiring is required to power the illumination.)
For optimal performance, we recommend using the JL Audio MLC-RW (Marine Lighting Controller).
General Specifications
| Continuous Power Handling (RMS) | 70 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 20 - 150 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ī© |
| System Frequency Response | 45 Hz - 25 KHz Ā± 3 dB |
Physical Specifications
| Frame Outer Diameter (A) | 7.70 in / 196 mm |
| Bolt Hole Circle Diameter (B) | 6.92 in / 176 mm |
| Motor Outer Diameter (C) | 4.27 in / 108 mm |
| Frontal Grille Protrusion* (D) | 1.00 in / 25 mm |
| Mounting Hole Diameter (E) | 6.25 in / 159 mm |
| Mounting Depth (F) | 3.15 in / 80 mm |
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
ā¢ Dynamic Modes 20
ā¢ Dynamic Speed Levels 10
ā¢ Static Colors 20
ā¢ Direct Preset Colors 7
ā¢ Brightness Levels 8
ā¢ Operating Voltage 10- 15V DC
ā¢ Operating Temp Range -4 Ā° F to + 1 58 Ā° F, (-20 Ā°C to + 70 Ā°C)
ā¢ Operating Frequency 433.92 MHz
ā¢ Operating Range* Up to 15 m (49.2 ft)
ā¢ Output Capacity 2 A (maximum)
ā¢ Recommended Fuse Value 10 A (maximum)
ā¢ Transmitter Battery CR2025 (3V)
ā¢ Dimensions 2. 99 in x 2 in x 1 .07 in
ā¢ (Transmitter) 76 mm x 50.8 mm x 27.2 mm
ā¢ Dimensions 4.02 in x 3.01 in x 1.42 in
ā¢ (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
ā¢ Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
ā¢ To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
ā¢ Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
ā¢ *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
ā¢ For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.
1x JL Audio XDM800/8 XDM Series 8-Channel Class-D Full Range Car/Marine Amplifier, 800 W - (XDM800/8)
JL Audio XDM800/8 8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 Ī© / 75 W x 8 @ 4 Ī© - 14.4V
The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexDā¢ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.
Here are a few examples of how the XDM800/8 can be used:
- Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
- Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ī©
- Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ī©, plus two 4Ī© subwoofers with 200 W each
- Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ī©, plus four 4Ī© speakers with 75 W each
- Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ī© + rear speakers with 75 W x 2
- Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ī©, plus two 4Ī© subwoofers with 200W each
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 75 W RMS x 8 |
| @ 2 Ī© | 100 W RMS x 8 |
| Bridged @ 4Ī© | 200 W RMS x 4 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 60 W RMS x 8 |
| @ 2 Ī© | 90 W RMS x 8 |
| Bridged @ 4Ī© | 180 W RMS x 4 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 80 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | 2 or 4 or All Channels |
| Channel Input Mode Switch | Yes (2/4/6/8 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 14.73 in / 374 mm |
| Depth (D) | 7.09 in / 180 mm |