Description
Included in this kit
This bundle includes a JL Audio SB-POL-RZG3/10TW3 Stealthbox® for 2019-Up Polaris RZR 4 900, 900XC, XP 1000 & XP4 1000, a JL Audio MX300/1 300 watt mono block, Marine/Power Sports grade amplifier, and a JL Audio Marine Remote Bass Controller for MHX and HX amplifiers.
1x JL Audio SB-POL-RZG3/10TW3 Stealthbox® for 2019-Up Polaris RZR 4 900, 900XC, XP 1000 & XP4 1000 - (SB-POL-RZG3/10TW3)
Polaris RZR vehicles are built to tackle your favorite off-road excursions, while barely breaking a sweat.
Designed to replace your RZR’s glove box assembly, this Stealthbox® generates rock-solid bass, while leaving plenty of room for storage. Constructed from 100% fiberglass with a weatherproof, texture-coated finish, this Stealthbox® houses a 10-inch, TW3 driver and includes all the mounting hardware needed for a secure, great sounding installation.
We even engineered a special panel that is attached to the Stealthbox and reinforces the RZR's firewall to reduce rattles and improve the overall sub-bass performance.
The Hard Data: Contains one 10TW3-D4 in a front-firing, sealed enclosure with a loading baffle. 400 watt power handling. Replaces glove box assembly in the dash. The factory glove box door is installed onto Stealthbox®. Wired for 2 ohm mono. Will only fit 2019-Up, RZR models! Will not fit 2020 RZR Pro model!
1x JL Audio MX300/1 300 watt mono block, Marine/Power Sports grade amplifier - (MX300/1)
JL Audio MX300/1 300 watt mono block, Marine/Power Sports grade amplifier
Features:
Differential-balanced inputs with Input Range switch, to accept line-level or speaker level input signals.
24 dB/oct. Low-Pass filter, variable from 40-400 Hz, defeatable
Bass Boost EQ: 0 to +12 dB @ 43 Hz
Variable 12 dB/oct. Infrasonic Filter from 20-40 Hz
Port for RBC-1 remote level control (optional)
Output Polarity switch
1x JL Audio Marine Remote Bass Controller for MHX and HX amplifiers - (M-RBC-1)
Water-Resistant Remote Level Control for HX and MHX Monoblock Amplifiers or any JL Audio Monoblock with a “Remote Bass Control” port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
HX-Series: HX300/1 (in Low Pass Mode)
MHX-Series: MHX300/1 (in Low Pass Mode)
The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D (RBC-1 also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
When the M-RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.