Description
Included in this kit
This bundle includes 2x Rockford Fosgate M2D2-10I 10" Color Optix Infinite Baffle Marine Subwoofer, DVC (2-Ohm)- 400 Watts Rms, 1600 Watts Peak, White & Stainless Grilles Included, and a Rockford Fosgate PM1000X1BD Mono Marine Amplifier - 300x1 @ 4-Ohm, 600x1 @ 2-Ohm, 1000x1 @ 1-Ohm.
2x Rockford Fosgate M2D2-10I 10" Color Optix Infinite Baffle Marine Subwoofer, DVC (2-Ohm)- 400 Watts Rms, 1600 Watts Peak, White & Stainless Grilles Included - (M2D2-10I)
Rockford Fosgate M2 10" DVC 2Ī© Color Optixā¢ Infinite Baffle Marine Subwoofer
The M2D2-10I Color Optixā¢ 10ā DVC 2-Ohm infinite baffle subwoofers deliver loud, clear, accurate bass, and light the way for your journey! M2 provides a customized look by using either the stainless-steel grille or the white āsportā grille insert. The subwoofers connect with the Rockford Fosgate Color Optixā¢ Controller and RF Connect App, allowing you to customize your own color patterns. The Element Readyā¢ design and IPX6 certification makes them truly purpose-built for marine or motorsport applications where protection from damaging UV rays and water spray is essential. This subwoofer is optimized for Infinite Baffle installations, where an enclosure is not required.
The M2 series of Element Readyā¢ subwoofers are designed to pair with the Rockford Fosgate Color Optixā¢ Controller and RF Connect App through its Deutschā¢ and Amphenolā¢ connectors integrated into the basket. This combined with their IP67 certification make these speakers Element Readyā¢ and truly purpose built for marine applications. To compliment the plug and play connectivity and streamline installation, M2 subwoofers are equipped with a VersaSwitchā¢ to make changing impedance between 1 and 4 ohms as easy as flipping a switch. This subwoofer is optimized for Infinite Baffle installations, where an enclosure is not required. A mounting baffle is required to isolate any interaction between the front and rear wavelengths to prevent cancellation.
- 2" (50mm) High Temp Kaptonā¢ Woofer Voice Coil Former
- Ultra-high temperature PA66 with 30% glass fill injection-molded frame with UV inhibitors
- Gold plated Marine grade brass terminals provide a corrosion resistant connection
- Industryās first molded in-frame connectors for simple connectivity in addition to conventional spade terminals
- Integrated Deutschā¢/Amphenolā¢ connectors make wiring connections simple and error proof
- Vented motor design with water-repelling nano coated mesh screen
- 100% UV Stable Centrex plastic grill
- Linear Aramid-Polyester Composite Spider
- Fully insulated silicone tinsel leads
- Injection molded UV stable foam surround
- VAST vertical attach surround technique increases effective radiating cone area up to 25%
- Injection molded mineral filled polypropylene cone body with UV inhibitors
- Co-molded surround and mineral filled polypropylene cone body
- Optically clear UV stable RGB Lighting Encapsulation
- Ultra-bright wide-angle RGB LEDs provide rich, reliable illumination
- VERSA impedance switch quickly allows series or parallel configuration without additional wiring
- Optimized for infinite baffle applications when an enclosure is not an option
- 2-Year Warranty
Specifications
Size
10"
Nominal Impedance (Ohms)
1-Ohm or 4-Ohm Switchable
Power Handling (Watts RMS)
400 Watts RMS
1600 Watts PEAK
1600 Watts PEAK
Voice Coil Diameter
2.0" (50.8 mm)
Voice Coil Type
Dual Voice Coil
Magnet Weight (oz)
55.02 oz. (1.56 Kg)
Frequency Response
20 Hz - 750 Hz
Fs (Hz)
43
Re (Ohms)
3.3
Le (mH)
1.17
Qms
5.69
Sd (cm2)
363
Qes
0.86
Qts
0.74
Vas
30.5
SPL (dB @ 1w/1m)
90.3
Xmax (mm)
11.0
Woofer Displacement
4.20 cu. ft. (0.15 Liters)
Speaker Connector
Deutschā¢
Cutout Diameter
8.87" (225.3 mm)
Mounting Depth
4.44" (112.7 mm)
Shipping Weight
13.8 Lbs. (6.26 Kg)
1x Rockford Fosgate PM1000X1BD Mono Marine Amplifier - 300x1 @ 4-Ohm, 600x1 @ 2-Ohm, 1000x1 @ 1-Ohm - (PM1000X1BD)
Rockford Fosgate Punch Marine 1,000 Watt Class-bd Mono Amplifier
The PM1000X1bd is a 1000 Watt mono amplifier with high dynamic power using Class-bd technology and a conformal coated pc board designed for motorsport and marine applications.
With its super efficient Class-bd circuit topology, the PM1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- 2-Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating300W x 1 @ 4ā¦
ā¤1.0% THD+N
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
1000 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCubeĀ®)
(PVC/PowerCubeĀ®)
491 Watts x 1 @ 4-Ohms
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
Bridgeable
No
Frequency Response
20Hz to 250Hz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class BD
Efficiency (average)
86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Hi/Low level: 1 RCA pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
140 A
Average Current Draw (13.8V Music)
65 A
Max. Current Draw (13.8V Sinewave)
130 A
Suggested Alternator
100 A
Dimensional Diagram
Dimensions (H x W x D)
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)
6.05 x 19.71 x 33.73 (cm)
Shipping Weight
12.9 Lbs. (5.85 Kg.)