Description
JL Audio ZR650-CSi
2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Aluminum Dome Tweeter
2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Aluminum Dome Tweeter
The ZR650-CSi features 6.5-inch (165 mm) component woofers with Kurt Müller cones and suspensions, precision-machined field plates and die-cast alloy baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The ZR component tweeters included in this system feature 1-inch aluminum domes with rubber-roll suspensions that damp unwanted ringing while delivering spectacular high-frequency extension. A flush-mounting fixture with a classy electro-formed ring provides a sophisticated touch in any installation.
ZR crossover networks are bi-amp capable and built with super-premium component parts, including U.S.-made Mills™ resistors mounted on an extruded aluminum heat sink, polypropylene capacitors, and segmented air-core inductors. Five levels of tweeter attenuation are provided, as well as four levels of mid-range presence adjustment, for twenty possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed "ZR" logo.
Sold as a pair. Made in Germany.
General Specifications
| Continuous Power Handling (RMS) | 85 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 25 - 175 W / Ch. |
| System Efficiency | 89.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 48 Hz - 25 KHz ± 3 dB |
Woofer Physical Specifications
| Frame Outer Diameter* (A) | 6.52 in / 166 mm |
| Grille Tray Outer Diameter** (B) | 6.76 in / 172 mm |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion*** (D) | N/A |
| Frontal Grille Protrusion**** (E) | 0.98 in / 25 mm |
| Mounting Hole Diameter (F) | 5.56 in / 141 mm |
| Mounting Depth (G) | 2.65 in / 67 mm |
Tweeter Physical Specifications
| Compact Flush Mount Fixture Diameter (A1) | 1.90 in / 48 mm |
| Enhanced Flush Mount Trim-Ring Diameter (A2) | 2.13 in / 54 mm |
| Surface Mount Fixture Diameter (A3) | 1.82 in / 46 mm |
| Compact Flush Mount Mounting Hole Diameter (B1) | 1.68 in / 43 mm |
| Enhanced Flush Mount Mounting Hole Diameter (B2) | 1.72 in / 44 mm |
| Compact Flush Mount Mounting Depth (C1) | 0.45 in / 11 mm |
| Enhanced Flush Mount Mounting Depth (C2) | 0.40 in / 10 mm |
| Compact Flush Mount Frontal Protrusion (D1) | 0.39 in / 10 mm |
| Enhanced Flush Mount Frontal Protrusion (D2) | 0.46 in / 12 mm |
| Surface Mount Frontal Protrusion (D3) | 0.85 in / 22 mm |
Crossover Physical Specifications
| Width (W) | 4.17 in / 106 mm |
| Height (H) | 1.72 in / 44 mm |
| Depth (D) | 5.84 in / 148 mm |