Description
Included in this kit
This bundle includes 2x Clarion CMSP-771RGB-SWG Premium 7.7-inch Coaxial Marine Speakers with built-in RGB illumination, 60W RMS, with White & Gray Metallic Grilles, a Clarion CMM-20 Marine Source Unit with LCD Display, IP66 Weatherproof Rating, Weather Band, Bluetooth, and a Clarion CMR-L1 Marine LED Light Controller.
2x Clarion CMSP-771RGB-SWG Premium 7.7-inch Coaxial Marine Speakers with built-in RGB illumination, 60W RMS, with White & Gray Metallic Grilles - (CMSP-771RGB-SWG)
7.7-inch woofer delivers more output and stronger bass, compared to the 6.5-inch model.
Includes White & Gray Metallic Sport Grilles
Salt & Sun Certified
Built-In RGB LED Lighting
Waterproof Connectors for Speaker & LED Illumination
60W RMS power handling, ideally matched to Clarion Marine amplifiers
Bridge-mounted, 1-inch (25 mm), edge-driven, silk dome tweeter with neodymium magnet and ferrofluid cooling
1x Clarion CMM-20 Marine Source Unit with LCD Display, IP66 Weatherproof Rating, Weather Band, Bluetooth - (CMM-20)
The CMM-20 is a high-performance, dual-zone source unit with built-in power and versatile audio features designed for marine applications.
Equipped with a variety of audio source options, the CMM-20 features a global, digital AM/FM tuner with built-in NOAA weather radio (US only), Bluetooth audio streaming, a USB 2.0 input for playback from your USB storage device (with 1A charging) and an analog auxiliary input, all designed to deliver non-stop sound, no matter how choppy the seas may get.
A rugged, weatherproof (IP66 rated) chassis houses a 2.37-inch (60 mm) LCD display with dimmable control for nighttime viewing. When in motion, you'll appreciate the large controls and uncluttered user interface with big text and backlit buttons.
Flexible audio output options include a rock-solid, onboard amplifier, capable of powering your speakers with 100 watts (25W RMS x 4 @ 4 ohms) of high-fidelity sound to two main zones, as well as a stereo pair of crystal-clear preamp outputs (1.5V RMS), with selectable Zone 2 or subwoofer functionality. Customize your sound with onboard tone controls (Bass & Treble) or select from four equalizer presets.
• Built to exceed industry standards for salt fog/UV exposure and vibration (ASTM B117/D4329)
• IP66 rated design and construction
• 2.37-inch (60 mm) LCD display with dim control
• Intuitive interface with large text
• Large, single rotary control and backlit buttons
• Global, digital AM/FM tuner, plus NOAA weather radio (US only)
• Save up to 9 of your favorite tuner stations/channels
• Wireless Bluetooth audio streaming
• USB 2.0 input with 1A charging output
• One stereo pair of auxiliary inputs (2V RMS)
• Built-in Amplifier: 4 x 25W RMS at 4 Ohms
• 2-channel preamp (1.5V RMS) outputs (Zone 2 or subwoofer)
• Built-in tone (Bass/Treble) controls or selectable 4 preset equalizer
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Transmitter Battery CR2025 (3V)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.