Description
Included in this kit
This bundle includes an ATG Audio 4-Channel Amplifier, 4 X 125W - ATG24004, an ATG Audio 6X9" 3-Way Coaxial Speakers with Grills, Pair - ATG69, an ATG Audio 6.5" 3-Way Coaxial Speakers with Grills, Pair - ATG65, and an ATG Audio 12 inch subwoofer 2" 4-layer aluminum single voice coil 4 ohm.
1x ATG Audio 4-Channel Amplifier, 4 X 125W - ATG24004 - (ATG24004)
The 2400W Class A/B 4-Channel Amplifier is the perfect choice for anyone looking for a powerful and reliable amplifier. With its powerful 2400W peak power and 2Ω mono load capability, this amplifier can easily drive even the most demanding subwoofers. The Class A/B circuitry ensures that the amplifier delivers clean, accurate sound, while the high-efficiency Mosfet design helps to keep the amplifier cool even under heavy loads. The 2400W Class A/B 4 Channel Amplifier also features a variety of features that make it easy to use and customize, including a variable low pass crossover, bass boost, and signal-to-noise ratio. With its powerful performance, reliable construction, and user-friendly features, the 2400W Class A/B 4 Channel Amplifier is the perfect choice for anyone looking for a great amplifier.
Features -
• Powerful sound: The 2400W Class A/B 4 Channel Amplifier delivers high-quality sound with its powerful 2400W peak power and 2Ω mono load capability.
• Reliable construction: The 2400W Class A/B 4 Channel Amplifier is built with high-quality components and features a high-efficiency Mosfet design that helps to keep the amplifier cool even under heavy loads.
• User-friendly features: The 2400W Class A/B 4 Channel Amplifier features a variety of features that make it easy to use and customize, including a variable low pass crossover, bass boost, and signal-to-noise ratio.
Specifications -
• Class AB Circuitry
• 2-Ohms Load Mono Capability
• Rated Power @ 14.4V
• Peak Power: 2400 Watts
• 4 x 125 Watts @ 4-Ohms Stereo
• 4 x 250 Watts @ 2-Ohms Stereo
• 2 x 750 Watts @ 4-Ohms Bridged
• X-Over Slope: 12dB
• Bass Boost @ 45Hz
• Audiophile Grade Components
• High-Efficiency Mosfet Design
• Variable low pass x-over
• Signal to Noise Ratio: >90dB
• Input Sensitivity: 285Mv-6v
• THD @ Rated Power: <0.5%
• QSINK Heat Management System
• Bass Boost @ 45Hz
1x ATG Audio 6X9" 3-Way Coaxial Speakers with Grills, Pair - ATG69 - (ATG69)
Upgrade your car audio game to the next level with ATG Audio 6x9" 4-Way Speakers. These speakers aren't just an accessory; they're a transformation of your in-car sound experience. The 4-way design of these speakers means that every musical note is reproduced with exceptional accuracy. From deep, thundering bass to smooth midrange and crisp, sparkling highs, you'll hear your favorite tracks in a whole new light. Feel the music, immerse yourself in the lyrics, and rediscover the joy of your road trips
Features -
• Maximum Power: 175 Watts
• RMS: 60 Watts
• Nominal Impedance: 4-Ohms
• Speaker Sensitivity: 101.5dB
• Injected PP Cone
• Piezo Tweeter
• Mylar Dome Midrange
• Barium Ferric Oxide Magnet
• Rubber Surround
• Grill included
• Master Carton: 4
Specifications -
• Unit of Measure: Pair
• Weight: 9.500000
• Length: 11.75
• Width: 9"
• Height: 6"
• Speaker Size: 6" x 9"
• Maximum Power: 175 Watts
• RMS Power: 60 Watts
• Sensitivity: 101.5dB
• Cone Type: Injected PP Cone
• Tweeter Type: Piezo
• Midrange Type: Mylar Dome
• Magnet Type: Barium Ferric Oxide Magnet
• Surround Type: Rubber
• Grill Included: Yes
• Series: ATG Core
• Master Carton: 4
1x ATG Audio 6.5" 3-Way Coaxial Speakers with Grills, Pair - ATG65 - (ATG65)
Experience audio excellence on the road like never before with ATG Audio 6.5" 3-Way Speakers. These speakers are your ticket to a premium sound experience in your vehicle. With their 3-way design, these speakers deliver a dynamic range of sound that captures every detail of your music. From deep, punchy bass to smooth midrange and crystal-clear highs, your favorite tracks come to life like never before. Whether you're cruising down the highway or stuck in traffic, you'll enjoy a concert-quality sound experience every time you turn up the volume.
Features -
• Maximum Power: 160 Watts
• RMS: 50 Watts
• Nominal Impedance: 4-Ohm
• Speaker Sensitivity: 103.4dB
• Injected PP Cone
• Piezo Tweeter
• Mylar Dome Midrange
• Barium Ferric Oxide Magnet
• Rubber Surround
• Grill included
• Master Carton: 10
Specifications -
• Unit of Measure: Pair
• Weight: 3.800000
• Length: 4
• Width: 6.5"
• Height: 8.5
• Speaker Type: 3-Way
• Speaker Size: 6.5"
• Maximum Power: 160 Watts
• RMS Power: 50 Watts
• Sensitivity: 103.4dB
• Cone Type: Injected PP Cone
• Tweeter Type: Piezo
• Midrange Type: Mylar Dome
• Magnet Type: Barium Ferric Oxide Magnet
• Surround Type: Rubber
• Grill Included: Yes
• Series: ATG Core
• Master Carton: 10
1x ATG Audio 12 inch subwoofer 2" 4-layer aluminum single voice coil 4 ohm - (ATG12W1500SVC)
The 12" 1500W 4 Ohm SVC Subwoofer is the perfect solution for anyone looking to upgrade their car audio system. With its powerful 1500 watts of peak power and 750 watts of RMS power, this subwoofer can handle even the most demanding bass tracks. The 2" 4-layer aluminum voice coil ensures smooth, accurate sound reproduction, while the heavy-gauge stamped steel basket and large-gauge spade terminals provide superior durability. The double-stitched foam surround help to protect the subwoofer from damage, while the compressed paper cone provide deep, rich bass response. This subwoofer is also a great replacement for loaded enclosures.
Features -
• Maximum Power: 1500 Watts
• Nominal Power: 750 Watts
• 2” 4 Layer Aluminum Voice Coil
• Heavy Gauge Stamped Steel Basket
• Large Gauge Spade Terminals
• Double Stitched Foam Surround
• Compressed Paper Cone
• Replacement For Loaded Enclosures