Included in this kit

---

This bundle includes a JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier, 1000 W, a JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier, a JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect, and a JL Audio RBC-1:Remote Bass Control.

1x JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier, 1000 W - (JD1000/1)

JL Audio JD1000/1: Monoblock Class D Subwoofer Amplifier 1000 W

JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.

Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω: 600 W RMS x 1
• @ 3 Ω: 800 W RMS x 1
• @ 2 Ω: 1000 W RMS x 1

General Specifications
• JD1000/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm)
• Frequency Response: 20 Hz - 150 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >75 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >45 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >1000 / 50 Hz
• Damping Factor @ 2 Ω: >500 / 50 Hz
• THD+N @ Rated Power: Less Than 1% @ 2 Ω per Ch.
• Input Voltage Range @ High-Level Inputs: 2 V - 10 V RMS
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Min.Copper Power / Ground Wire Gauge: 4 AWG wire
• Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)

Signal Processing
• Filter Mode(s): Low-Pass only
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz - 200 Hz
• Detented, Calibrated Filter Freq. Potentiometer: No
• Filter Defeat Function: No
• Infrasonic Filter: none
• Bass Boost EQ: 0 to +12 dB @ 45 Hz
• Output Polarity Switch: No
• Remote Subwoofer Level Control: Optional (RBC-1)
• Remote Bass EQ Boost Control: No
• Pass-Through Preamp Output: Buffered

1x JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier - (XD-PCS4-1B)

JL Audio XD-PCS4-1B: Premium 4 AWG 12 V Power Connection Kit Single Amplifier

Premium 4 AWG 12V Power Connection System for One Amplifier

Everything you need to make secure, high-integrity power connections to a single amplifier with up to a 100A fuse rating. Our compact Maxi® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper.

What's in the kit?



XD-MFBW-MAXI Fuse Holder with Genuine 80A Maxi® Fuse

19 ft. (5.8 m) Blue 4 AWG Premium Power Wire, terminated with ring

3 ft. (0.9 m) Clear 4 AWG Premium Ground Wire, terminated with ring

20 ft. (6.1 m) Blue Remote Turn-On Lead Wire

Self-Tapping Ground Screw

Rubber Firewall Grommet

Nylon Wire Ties

Hex Wrench for Fuse Holder



Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!

This kit is appropriate for single amplifiers with fuse ratings from 40A to 100A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate Maxi® fuse separately.

1x JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect - (XD-CLRAIC2-18)

JL Audio XD-CLRAIC2-18: 2-Channel 18 ft (5.49 m) Core Audio Interconnect

2-channel Core Audio Interconnect Cable - 18 ft (5.49 m)

Twisted-Pair Construction to Reject Noise

Pure OFC Copper Conductors with Polyethylene Dielectrics

Molded Connector Bodies

Machined Brass Connector Elements

1x JL Audio RBC-1:Remote Bass Control - (RBC-1)

JL Audio RBC-1: Remote Bass Control

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:

JX-Series: JX250/1, JX500/1, JX1000/1D

When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:

Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2

Original Slash Series: 500/1, 1000/1, 450/4, 500/5

G-Series: All Models

A-Series: All Models

e-Series: All Models (including marine versions)

M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

A satin-finish aluminum knob can be purchased separately.