Description
Included in this kit
This bundle includes a JL Audio XD200/2v2:2 Ch. Class D Full-Range Amplifier 200 W, and a JL Audio C2-650:6.5-inch (165 mm) 2-Way Component Speaker System (Pair).
1x JL Audio XD200/2v2:2 Ch. Class D Full-Range Amplifier 200 W - (XD200/2v2)
XD200/2v2
2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The XD200/2v2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.
The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω | 75 W RMS x 2 |
@ 2 Ω | 100 W RMS x 2 |
Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω | 60 W RMS x 2 |
@ 2 Ω | 90 W RMS x 2 |
Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >150 / 50 Hz |
Damping Factor @ 2 Ω | >75 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
Filter Mode(s) | Low-Pass or High-Pass |
Filter Slope(s) | 12 dB/octave |
Filter Frequency Range | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometer | Yes |
Filter Defeat Function | Yes |
Remote Level Control | Optional (HD-RLC) |
Security Cover for Controls | Yes |
Pass-Through Preamp Output | Buffered |
Physical Specifications

Height (H) | 2.05 in / 52 mm |
Width (W) | 6.85 in / 174 mm |
Depth (D) | 7.09 in / 180 mm |
Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio C2-650:6.5-inch (165 mm) 2-Way Component Speaker System (Pair) - (C2-650)
JL Audio C2-650
2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs.
The C2-650 system features 6.5-inch (165 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.
The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.
C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector.
Sold as a pair.
General Specifications
Continuous Power Handling (RMS) | 60 W |
Peak Music Power | 225 W |
Recommended Amplifier Power (RMS) | 15 - 100 W / Ch. |
System Efficiency | 91.0 dB @ 1 W / 1 m |
System Nominal Impedance | 4 Ω |
System Frequency Response | 59 Hz - 22 KHz ± 3 dB |
Woofer Physical Specifications
Frame Outer Diameter* (A) | 6.5 in / 165 mm |
Grille Tray Outer Diameter (B) | 6.84 in / 174 mm |
Motor Outer Diameter (C) | 3.15 in / 80 mm |
Frontal Coaxial Tweeter Protrusion (D) | N/A |
Frontal Grille Protrusion** (E) | 0.85 in / 22 mm |
Mounting Hole Diameter (F) | 5.56 in / 141 mm |
Mounting Depth (G) | 2.44 in / 62 mm |
Tweeter Physical Specifications
Flush Mount Fixture Diameter (A1) | 1.87 in / 48 mm |
Surface Mount Fixture Diameter (A2) | 1.69 in / 43 mm |
Flush Mount Mounting Hole Diameter (B) | 1.625 in / 41 mm |
Flush Mount Mounting Depth (C) | 0.76 in / 19 mm |
Flush Mount Tweeter Frontal Protrusion (D1) | 0.29 in / 7 mm |
Surface Mount Tweeter Frontal Protrusion (D2) | 0.92 in / 23 mm |
Crossover Physical Specifications
Width (W) | 3.36 in / 85 mm |
Depth (H) | 1.44 in / 37 mm |
Depth (D) | 4.72 in / 120 mm |