Description
Included in this kit
This bundle includes a Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm, and a Kicker Warhorse WXA3600.1 Monoblock Subwoofer Amplifier | 3600 Watts x 1 at 1-Ohm - 49WXA36001.
1x Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm - (49L7X122)
Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm The KICKER SoloX L7X Ferrite Competition Subwoofer brings the most advanced bass technology and unprecedented performance, from the guys who invented it for a vehicle. A motor like no other – it includes a massive, triple-stacked ferrite magnet surrounding a hyper-extended pole piece, engineered for an enormous, more linear magnetic field and amazing heat dissipation. It's ultra-deep bass at very high volume. L7X's three-inch voice coil is supported by a dual-spider suspension system, and the double-pressed pulp cone is attached to an ultra-long-throw Santoprene surround - equipped with KICKER's square cone tech and ribbed corners for continuous force and air movement. Field-Replaceable Recone Kit - Using an exclusive, surround compression system, bolt-on spider landing, and helpful alignment shims, repairing an L7X is no sweat! Features: • Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and no gluing required
• Forced Air Cooling™
• Three-inch, aluminum voice coil former
• Dual-spider suspension
• Double-pressed pulp cone
• Heavy-duty UV-resistant Santoprene surround
• Custom rubber magnet boot
• Cast-aluminum basket
• Single 8 AWG terminal and dual 8 AWG terminal block
• Triple-Stacked Ferrite Magnet
Specifications:
• Size (in, cm) - 12, 30
• Rated Impedance (Ohms) - 2 DVC
• Rec Amp Power rms - 1000-2000
• Frequency Response - 20-100
• Magnet Diameter (in, cm) - 8-11/16, 22
• Total Magnet Weight (oz, kg) - 406, 11.5
• Voice Coil Diameter (in, mm) - 3, 75
• Voice Coil Winding Width (in, mm) - 2.5, 62.5
• Top Plate Thickness (in, mm) - 0.5, 13
• Xmax (in, mm) - 1.25, 31.25
• Mounting Cutout (in, cm) - 11-1/16, 28.1
• Mounting Depth (in, cm) - 10-1/8, 25.7
• Recommended Vented Box Volume (Cu. Ft., L) - 3, 84.9
• Port Opening (in x in, cm x cm) - 3.5 x 13, 9 x 33
• Port Length (in, cm) - 36.5, 93
• Vented Enclosure Tuning Frequency (Hz) - 31
1x Kicker Warhorse WXA3600.1 Monoblock Subwoofer Amplifier | 3600 Watts x 1 at 1-Ohm - 49WXA36001 - (49WXA36001)
Kicker WXA3600.1 Warhorse Monoblock Subwoofer Amplifier
The Warhorse WXA3600.1 was engineered completely in-house by KICKER Research and Development for ultra-high SPL applications.
Not your Average Amp
• Features extreme reliability under intense bass power and overall use
• Engineered completely in-house by KICKER R&D
• Full-bridge Class-D design
• Quad micro-controller-regulated cooling fans
• Capable of daisy-chaining remote power across multiple amps
• Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
• Includes premium remote bass-level control with a magnetic mount
• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
Specifications • MODEL: WXA3600.1
• *RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600x1
• *RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500x1
• *RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <1%THD): 1400x1
• **Dynamic Power (watts): 5000
• Frequency Response (Hz): 10-200
• Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
• Signal-to-Noise Ratio (dB; ref: 1W output): >70
• Input Sensitivity: low level 125mV-5V, high level 1V-40V
• Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
• Subsonic Filter: Defeatable @ 15Hz, 24dB/octave
• Competition Mode: warhorse-competition-mode.pdf
• Dimensions (in, cm): H – 2-9/16, 6.5, W – 9-1/8, 23.2, L – 15-3/8, 39.1
Every aspect of the Warhorse was tortured mercilessly in our labs to ensure extreme performance and reliability. It was engineered completely in-house by KICKER Research and Development for ultra-high SPL applications.
Engage Competition mode to set the input sensitivity to 4 volts, locking the gain potentiometer out for easy gain-matching across multiple amps, amongst other slick features.
