Description
JL Audio MV700/5i 5-channel Class D System Amplifier with integrated DSP, 100 W x 4 @ 2 ohm + 300W x 1 @ 2 ohm - 14.4V
5-Channel Class D System Amplifier with Integrated DSP, 100 W x 4 @ 4 Ī© + 300 W x 1 @ 2 Ī© - 14.4V
Designed to simplify great audio, every MVi amplifier combines our advanced NexD2ā¢ switching amplifier technology with an integrated, full-featured digital signal processor.
Employing our second generation NexD2ā¢ amplifier technology, the MV700/5i efficiently powers a complete audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.
The NexD2ā¢ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFETā¢ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TĆ¼Nā¢ Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, Subwoofer Output Harness, 6 ft A/B USB Cable
Features
Unprecedented, Onboard DSP Tuning Power!
PC or MacĀ®, via USB wired connection iOSĀ® & AndroidĀ® Devices, via BluetoothĀ® (with optional VXi-BTC).
2nd-Gen NexD2ā¢ Switching Amplifier Technology
- DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion.
- Latest generation of DirectFETĀ® MOSFET Output Devices
Compact Footprint
- Designed to fit in tight spaces
- Cast alloy chassis with marine-grade speaker connections and keyhole mounting design
- A perfect pairing with Subwoofer MVi amplifiers
Versatile, Differential-Balanced Analog Inputs
- Differential-Balanced Analog Inputs accept a wide range of signal levels (up to 16V RMS), and offer outstanding noise rejection for clean, clear audio.
JLidā¢ System Command with Networking Capabilities (sold separately)
Proprietary JL Audio protocol provides control interface and all communication for MVi amplifiers and optional JLidā¢ accessories, including:
- VXi-BTC BluetoothĀ® Communicator: Adds wireless connectivity for a compatible iOSĀ® or AndroidĀ® device, permitting amplifier setup from these devices. (Functionality varies by model.)
- M-DRC-50 Controller:Push-button control with RGB indicator allows preset selection from the helm.
- MVi-HUB JLid-COMM and Network Bridge Hub: Provides network connectivity for up to six MVi amplifiers (one master and five slave amplifiers) for full-system DRC control and Preset selection.
Rated Continuous (RMS) Power @ 14.4 V
| Main Channels @ 4 Ī© | 75 W RMS x 4 |
| Main Channels @ 2 Ī© | 100 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 200 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| Main Channels @ 4 Ī© | 60 W RMS x 4 |
| Main Channels @ 2 Ī© | 90 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 180 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response (Main Channels) | 12 Hz - 24 kHz (+0, -1dB) |
| Frequency Response (Subwoofer Channel) | 12 Hz - 1 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) | 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs - Main Channels) | 101 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs - Subwoofer Channel) | 102 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs - Main Channels) | 82 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs - Subwoofer Channel) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >50 / 50 Hz |
| THD+N @ Rated Power (Main Channels) | <1% @ 2 Ī© per Ch. |
| THD+N @ Rated Power (Subwoofer Channels) | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 16 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 60 A (AFS, AGU or MaxiFuseā¢) |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 13.96 in / 355 mm |
| Depth (D) | 6.93 in / 176 mm |