Cicada Audio 14CXCHv2-4X4 4 CH CX Amp & 4 CHv2 Speaker System

Included in this kit

---

This bundle includes a Cicada Audio CX600.4D - 4 X 150 @ 2 Ohm, a Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire, a Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR, a Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, a Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ®, a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®, a Cicada Audio CH65.2v2 - High Efficiency 6.5-Inch Horn Coaxial Speakers - 2 Ohm, Pair, and a Cicada Audio CH69.2W - All Weather Coaxial Horn 6x9-inch - 2 Ohm, Pair.

1x Cicada Audio CX600.4D - 4 X 150 @ 2 Ohm - (CX600.4D)

POWER SUPPLY
Voltage: 9 - 16 VDC
Idling current: 1.32 A
Switched off: <1 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power: 51
Remote IN: 7 ÷ 15 VDC (1 mA)
Fuse: 30 A
DC Offset (Senses DC offset for Turn on/off): Speaker input - selectable
VOX (Signal Sensing Turn on/off): Speakers input - selectable
REM (Switched 12V on/off): Switched 12V turns the amplifier on

AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 91 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >200
Input sensitivity: 0.2 - 12 V RMS
Input impedance: 15k Ω
LOAD IMPEDANCE (MIN):
• 4 Ch: 1-2-3-4 2Ω
• 2 Ch: Bridge (1-2) (3-4) 4Ω
MAX POWER 600 W
OUTPUT POWER (RMS) @ 12.5 VDC, 1% THD:
• 4 Ch @ 4Ω: 70 W x 4
• 4 Ch @ 2Ω: 115 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 218 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 4 Ch @ 4Ω: 92 W x 4
• 4 Ch @ 2Ω: 152 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 302 W x 2

CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 70 W x 4
SN ratio (ref. 1 W output): 75 dBA

SIGNAL CONNECTIONS
Input Stage: 6 channels in High and Low Input, 4 channels / 2 Preouts

DIGITAL SIGNAL PROCESSOR
(32 bit Cirrus Logic; Clock speed: 147 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope: Linkwitz @ 12/18/24/48 dB
Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
Phase inversion: 0° / 180°
Digital Input Equalizer: (to correct HD curve) Audio PreSets
Output Equalizer, Parametrics Equalizers: ±12 dB; 10 pole; 20 - 20k Hz
Time Alignment Distance 0 ÷ 510 cm / 0 to 133.9 in.
Time Alignment Delay 340 to 10 ms
Time Alignment Step 0,08 ms; 2,8 cm / 1.1 in.
SYSTEM PRESETS:
Acoustic Preset 6 Harley Davidson Audio Presets/De EQ

1x Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire - (HDPro4K)

HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes:
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDFOM Front output harness – Molex
HDROM Rear output harness w/ 6 FT extension – Molex
HDPG8K 8-Gauge Power/Ground Kit

1x Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR - (CHDRGG)

Custom tooled Road Glide(R) replacement grill for increased height for CH/CM series speakers.

1x Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair - (CHDSGG)

Custom tooled Street Glide® replacement grills add additional depth required for aftermarket speaker upgrades.

1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)

Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.

Black finish allows for matching to any color bike. No need for additional color match painting.

1x Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ® - (14HDAR-RG)

Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®

HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.

NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!

Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only

1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)

Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®

HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.

Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only

1x Cicada Audio CH65.2v2 - High Efficiency 6.5-Inch Horn Coaxial Speakers - 2 Ohm, Pair - (CH65.2v2)

FEATURES
• Designed for 2014+ H-D factory designed locations
• Removable threaded horn flange for easy modification
• Aluminum tweeter diaphragm material
⁃ Brighter sound
⁃ Maximized efficiency
• External 12dB crossover with optional -3/-6 tweeter attenuator
• 1.4-inch OFC copper wire tweeter voice coils offers great sound while generating less heat
• Water resistant treated paper cone
⁃ Lightweight and heavy duty
⁃ Maximized efficiency
• Black CoatTM 2-inch high conductivity, low resistance OFC copper wir
mid-bass voice coil ensures extreme temperature thermal performance
• N35SH Neodymium magnet
• Die cast Aluminum custom tooled basket with Vortex Flow VentingTM
• Two (2) year warranty

SPECIFICATIONS
• 2 ohm 6.5-inch coaxial horn driver
• Power Handling: 250W RMS/500W MAX
• Voice Coil: 2.0-inch/51mm mid-bass and 1.4-inch/36mm tweeter
• Tweeter Dome: Aluminum
• Crossover: 12 dB external custom tooled. vented, encased crossover
• Tweeter Attenuation: -3/-6dB heat sink encased resistor crossover
• Cone: Water resistant treated paper cone
• Magnet: Neodymium
• Sensitivity: 99 dB, 1W/1M
• Frequency Response: 75Hz - 20kHz +/- 3dB
• Mounting Depth: 3.0-inch/76mm
• Mounting Diameter: 5.7-inch/145mm

1x Cicada Audio CH69.2W - All Weather Coaxial Horn 6x9-inch - 2 Ohm, Pair - (CH69.2W)

FEATURES:
Nanofram™ Horn Cover
Exclusive Cicada All-Weather Design for protection from rain
Removable threaded horn ring for easy modification
Rain or Shine™ all weather performance design
Available in 4- or 2-Ω versions
Aluminum tweeter diaphragm material
Brighter sound
More efficient
External 12dB crossover with optional -3/-6 tweeter attenuator
4-inch OFC copper wire tweeter voice coils offer great sound while generating less heat
Water resistant treated paper cone
Lightweight / rigid
Maximized efficiency / super strong
Black Coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
N35SH Neodymium magnet
Die cast Aluminum custom tooled basket with Vortex Flow Venting™
Warranty: 2 years

SPECIFICATIONS:
2Ω – 6X9-inch coaxial horn driver
Power handling: 250W RMS/500W MAX
Voice Coil: 2.5-inch/64mm Mid-bass & 1.4-inch/36mm Tweeter
Tweeter Dome: Aluminum
Crossover: 12dB external custom tooled, vented, encased crossover
Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover
Cone: water resistant treated paper cone
Magnet: Neodymium
Sensitivity: 95dB
Frequency response 75Hz – 20kHz +/- 3dB
Mounting Depth: 3.7-inch/93mm
Mounting Diameter: 6.6-inch/155mm X 9.3-inch/226mm