rev10b-x%2bg3dual-b__1__80238.1701719146.jpg?c=2 "Wet Sounds For Malibu G3 Tower System Two Pairs of REV10B-X 10\" Black X-Mount Tower Speakers & Polished Adapters")
rev10b-x%2bg3dual-b__1__80238.1701719146.jpg?c=2 "Wet Sounds For Malibu G3 Tower System Two Pairs of REV10B-X 10\" Black X-Mount Tower Speakers & Polished Adapters")
Description
Included in this kit
This package includes two pairs of REV10B-X 10" Full Range Wake Tower Speakers with tower adapter brackets for Malibu G3 Towers & Dual REV10s
Not For The Faint Of Heart
The REVOLUTION Series tower speakers from Wet Sounds are in a league of their own. These speakers incorporate REV TEC Technology which allows these speakers to sounds loud and clear on and off axis for a wider field of sound. These tower speakers also come with stainless steel clamps and hardware that is needed for installation.
If you're serious about your boat's stereo, these are the speakers you want. Each enclosure has a power handling of 300 Watts RMS, and a peak rating of 600 Watts.
REV10 Specifications
Power & Sound Specifications
| Impedance | 4 Ohms |
| RMS Watts | 300 |
| Peak Watts | 600 |
| Frequency Response | 20Hz to 20KHz |
| Sensitivity | 92 dB @ 1 Watt / 1 Meter |
| Mid Bass | 10 inch Kevlar reinforced EFG™ cone woofers with polyurethane surround. |
| High Frequency | Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output |
Physical Specifications
| Front to Back Depth | 13" (330.20mm) |
| Hang Height | 11 9/16" (293.68mm) |
| Width | 10 5/8" (269.87mm) |
| Hang Weight | 14.8 pounds / 6.71 kg each |
Technologies
| Cone Construction | Epoxy Fiber Glass Speaker Cone |
| Enclosure Construction | Reinforced Composite Enclosure |
| Wet Sounds Extensive Crossover Network | Passive Crossovers Built Onto The Drivers |
| HLCD | Horn Loaded Compression Driver - Hear more, further away |
SD2 Specifications
Rated Continuous (RMS) Power @ 14.4 V
| 4 Ohm Stereo | 400 X 2 |
| 2 Ohm Stereo | 620 W RMS X 2 |
| 4 Ohm Mono | 1250 W RMS X 1 |
| 2 Ohm Mono | This Amp Will Go Into Protect At 2 Ohm Mono |
Features
| Removable Wire Plugs | Aids in installation and improves waterproofing |
| Thermal Protection | Prevents Damage To Amplifier By Cutting Power in Excessive Operating Temperatures |
| Frequency Response | 8 Hz - 50 kHz (+0, -1dB) |
| Max Current Rating | 110 Amps |
| Signal To Noise Ratio | >83dB>110dB |
| Crossover Type | Switchable - Hi/Lo/Full |
| Operating Voltage | 10 Volts - 16 Volts |
| Voltage Protection | 15.6V Overvolt Protection |
| Input Voltage | Variable 200mV to 6.1V |
Physical Specifications
| Height (H) | 2.7" |
| Width (W) | 13.5" |
| Depth (D) | 9.819" |
| Net Weight | 6lb |
