Alpine RS-SB10 10" Halo R-Series R2 Preloaded Sub Enclosure & R2-A75M Amp Bundle including RUX Bass Knob

Included in this kit

---

This bundle includes an Alpine R2-A75M R-Series Mono Subwoofer Amplifier - 750W at 1-Ohm, Hi-Res Certified, an Alpine RUX-KNOB.2 Remote Bass Knob, and an Alpine RS-SB10 10" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink.

1x Alpine R2-A75M R-Series Mono Subwoofer Amplifier - 750W at 1-Ohm, Hi-Res Certified - (R2-A75M)

Experience the impressive power and exceptional performance of the Next-Generation R-Series R2-A75M Mono Amplifier, now featuring a more compact design.

Elevate Your Audio with the Alpine R2-A75M Mono Amplifier - delivering powerful 750W performance in a sleek, compact design. Built with Alpine’s cutting-edge Class D Amplifier Circuit, this next-generation R-Series amp offers exceptional sound quality and efficiency, making it the perfect addition to any car audio system.

Reduced Footprint - The R2-A75M features a reduced footprint that’s 15% smaller than the previous model (R-A75M), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.

Convienience and Simplicity – The R2-A75M features intentional design choices that prioritize convenience and simplicity. All speaker connections are consolidated on one side of the device for easy access, while the amplifier controls have been relocated to the top under a removable plate, allowing for quick adjustments to gain and crossover controls.

MAIN FEATURES
• 750W Mono Amplifier
• Alpine’s Class D Amplifier Circuit
• Reduced Footprint(15% smaller vs previous model)
• One-Sided Terminal Layout
• Top Panel Sound Controls
• Optional Remote Bass Knob Compatible(required RUX-KNOB.2 or RUX-H01, sold separately)

TECH SPECS
• Dimensions: 11.1” W x 2.17” H x 6.5” D
• Power Rating: 14.4V, ≤ 1% THD +N
• Power Output: 500W RMS x 1 @ 4Ω, 750W RMS x 1 @ 2Ω
• S/N Ratio: >75dB
• Frequency Response: 10Hz – 400Hz
• Damping Factor: >250

WHAT’S IN THE BOX
• R2-A75M Mono Amplifier
• Owner’s Manual
• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box
• (x4) Screws for amplifier mounting to the vehicle
• (x3) Allen wrench for amplifier connection and installation (2mm, 2.5mm, 3mm)
• Alpine Registration Card
• Alpine Limited Warranty Sheet

1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)

The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.

Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.

From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.

Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).

1x Alpine RS-SB10 10" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink - (RS-SB10)

The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass.

PRODUCT FEATURES:
Unique ProLink™ Design – ProLink™ is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure.
Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic.
Improved Performance – The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation.

General Specs:
• Size: 10”
• Weight: 42 lbs
• Dimensions: 16” x 12.68” x 14.5”
• Frequency Response: 26Hz - 200Hz
• Power Range: 300W - 750W RMS
• Power Handling: 750W RMS / 2250W Peak
• Magnet Weight: 123 oz
• Voice Coil Diameter: 65.5 mm (2.6”)
• Linear Excursion (Xmax): 20 mm

T/S Parameters:
• Sensitivity (1W/1m): 82.3 dB
• DC Resistance (Re): 1.9Δ + 1.9Δ
• Free Air Resonance (Fs): 31 Hz
• Equivalent Stiffness: 18.2 L
• Mechanical Q (Qms): 7.07
• Electrical Q (Qes): 0.5
• Total Q (Qts): 0.47
• Cone Area (Sd): 333 cm2
• Linear Excursion (Xmax): 20 mm
• Mechanical Travel (Xmech): 70 mm