Description
Included in this kit
This bundle includes an Alpine RUX-KNOB.2 Remote Bass Knob, 2x Alpine RS-SB10 10" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink, and an Alpine R2-A150M R-Series Mono Subwoofer Amplifier - 1500W at 1-Ohm, Hi-Res Certified.
1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)
The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.
Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.
From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).
2x Alpine RS-SB10 10" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink - (RS-SB10)
The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass.
PRODUCT FEATURES:
Unique ProLink™ Design – ProLink™ is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure.
Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic.
Improved Performance – The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation.
General Specs:
• Size: 10”
• Weight: 42 lbs
• Dimensions: 16” x 12.68” x 14.5”
• Frequency Response: 26Hz - 200Hz
• Power Range: 300W - 750W RMS
• Power Handling: 750W RMS / 2250W Peak
• Magnet Weight: 123 oz
• Voice Coil Diameter: 65.5 mm (2.6”)
• Linear Excursion (Xmax): 20 mm
T/S Parameters:
• Sensitivity (1W/1m): 82.3 dB
• DC Resistance (Re): 1.9Δ + 1.9Δ
• Free Air Resonance (Fs): 31 Hz
• Equivalent Stiffness: 18.2 L
• Mechanical Q (Qms): 7.07
• Electrical Q (Qes): 0.5
• Total Q (Qts): 0.47
• Cone Area (Sd): 333 cm2
• Linear Excursion (Xmax): 20 mm
• Mechanical Travel (Xmech): 70 mm
1x Alpine R2-A150M R-Series Mono Subwoofer Amplifier - 1500W at 1-Ohm, Hi-Res Certified - (R2-A150M)
The Alpine “R-Series” line of speakers, subwoofers and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.
FEATURES
Install
Terminal Layout: One side
Small footprint for easy installation
Screw terminals (for speaker and power cables)
General
Class-D Amplification (Digital)
Channel Design: Mono Channel
Top panel controls
Thermal Management Control
Top Mounted LED Power/Status Indicator
Speaker Level Input with remote turn on
Crossover: Adjustable Low-pass (LPF) and Variable Subsonic filter
Adjustable Gain Control
Bass EQ
Remote Bass Control (RUX-KNOB2) Ready
SPECIFICATIONS
Max Power Output Ratings
Total Max Power: 2300W
RMS Power Ratings
Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1500W
Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 700W
Sound Tuning
Crossover: Variable LPF: 50-400Hz (-24dB/oct)
Crossover: Variable Subsonic: 8Hz-40Hz (-24dB/oct)
General
Power Requirements: 14.4 V.DC (9 - 16 V allowable)
Input Sensitivity (RCA Input): Hi: 0.4V - 10V / Low: 0.1V - 4.0V
High Level Input with automatic power on
Cable size: Power Cable AWG 4, SPK Cable AWG 8
Frequency Response: 10Hz – 400Hz
THD+N (@ 10W into 4 Ohms): <0.04%
Damping Factor: >250
Weight: 5kg
Dimensions
Heat Sink (WxHxD) mm: 341 x 65 x 185
