Description
Included in this kit
This bundle includes an Alpine RS-SB12 12" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink, an Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm, and an Alpine RUX-KNOB.2 Remote Bass Knob.
1x Alpine RS-SB12 12" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure with ProLink - (RS-SB12)
The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass.
PRODUCT FEATURES:
Unique ProLink™ Design – ProLink™ is unique to Alpine and allows you to link two R2-SB12V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure.
Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB12V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic.
Improved Performance – The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation.
General Specs:
• Size: 12”
• Weight: 48.4 lbs
• Dimensions: 17” x 14.625” x 15”
• Frequency Response: 26Hz - 200Hz
• Power Range: 300W - 750W RMS
• Power Handling: 750W RMS / 2250W Peak
• Magnet Weight: 144 oz
• Voice Coil Diameter: 65.5 mm (2.6”)
• Linear Excursion (Xmax): 20 mm
T/S Parameters:
• Sensitivity (1W/1m): 85 dB
• DC Resistance (Re): 1.9Δ + 1.9Δ
• Free Air Resonance (Fs): 29 Hz
• Equivalent Stiffness: 36.9 L
• Mechanical Q (Qms): 6.32
• Electrical Q (Qes): 0.44
• Total Q (Qts): 0.41
• Cone Area (Sd): 479 cm2
• Linear Excursion (Xmax): 20 mm
• Mechanical Travel (Xmech): 72 mm
1x Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm - (S2-A60M)
Reliable Performance and Value-Oriented Products -
Three new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.
Allows High Power Output -
Compact and Powerful: the new digital amplification circuit allows high power output while keeping a small footprint. The S-A60M measures just 204mm in width x 204mm in length for easy installation in virtually any vehicle.Along with Alpine’s new intelligent amplifier platform, the new S-Series amplifiers feature an improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback.
Specifications -
• Power Requirements: 14.4 V.DC (9 - 16 V allowable)
• Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V
• High Level Input with automatic power on
• Cable size: Power Cable AWG 4, SPK Cable AWG 8
• Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz - 400Hz
• THD+N (@ 10W into 4 ohms): <0.03%
• THD+N (@ 50W into 4 ohms): <0.08%
• Damping Factor: >1000
• Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
• Weight: 1.9 kg
Features -
• Amplifier Type: Class-D (Digital)
• Channel Design: Mono Channel
• Thermal Management Control
• Top Mounted LED Power/Status Indicator
• Speaker Level Input with remote turn on
• Crossover: Adjustable Low-pass (LPF)
• Gain Control: Adjustable
• Bass EQ
• Bass Control: Remote Bass Control (RUX-KNOB2) Ready
1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)
The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.
Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.
From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).
