Description
Included in this kit
This bundle includes an Alpine R2-A75M R-Series Mono Subwoofer Amplifier - 750W at 1-Ohm, Hi-Res Certified, an Alpine R2-SB10V Single Type R2 10-in Subwoofer in Vented Enclosure, and an Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers.
1x Alpine R2-A75M R-Series Mono Subwoofer Amplifier - 750W at 1-Ohm, Hi-Res Certified - (R2-A75M)
Experience the impressive power and exceptional performance of the Next-Generation R-Series R2-A75M Mono Amplifier, now featuring a more compact design.
Elevate Your Audio with the Alpine R2-A75M Mono Amplifier - delivering powerful 750W performance in a sleek, compact design. Built with Alpine’s cutting-edge Class D Amplifier Circuit, this next-generation R-Series amp offers exceptional sound quality and efficiency, making it the perfect addition to any car audio system.
Reduced Footprint - The R2-A75M features a reduced footprint that’s 15% smaller than the previous model (R-A75M), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
Convienience and Simplicity – The R2-A75M features intentional design choices that prioritize convenience and simplicity. All speaker connections are consolidated on one side of the device for easy access, while the amplifier controls have been relocated to the top under a removable plate, allowing for quick adjustments to gain and crossover controls.
MAIN FEATURES
• 750W Mono Amplifier
• Alpine’s Class D Amplifier Circuit
• Reduced Footprint(15% smaller vs previous model)
• One-Sided Terminal Layout
• Top Panel Sound Controls
• Optional Remote Bass Knob Compatible(required RUX-KNOB.2 or RUX-H01, sold separately)
TECH SPECS
• Dimensions: 11.1” W x 2.17” H x 6.5” D
• Power Rating: 14.4V, ≤ 1% THD +N
• Power Output: 500W RMS x 1 @ 4Ω, 750W RMS x 1 @ 2Ω
• S/N Ratio: >75dB
• Frequency Response: 10Hz – 400Hz
• Damping Factor: >250
WHAT’S IN THE BOX
• R2-A75M Mono Amplifier
• Owner’s Manual
• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box
• (x4) Screws for amplifier mounting to the vehicle
• (x3) Allen wrench for amplifier connection and installation (2mm, 2.5mm, 3mm)
• Alpine Registration Card
• Alpine Limited Warranty Sheet
1x Alpine R2-SB10V Single Type R2 10-in Subwoofer in Vented Enclosure - (R2-SB10V)
The new R2-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation. ProLink™ is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 Linking Kit (sold separately) to create a dual subwoofer-enclosure. Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo Display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. The ported enclosure design features an optimized vent and rounded internal port edges that maximize the output performance of the subwoofer. Made from 3/4" medium density fiberboard (MDF) with internal edge bracing, the R2-SB10V is sturdy with a rugged, yet stylish black carpet cover and brushed aluminum finish on the metallic front baffle. The R2-SB10V includes a preloaded R2-Series R2-W10D4 10" subwoofer that's turned to 36Hz for optimized performance with Alpine's R-Series sound system line. Dual 4Ω voice coils are wired in parallel for a 2Ω load that's compatible with the R2-Series R2-A75M Mono Power Amplifier.
Key Features
Groundbreaking Alpine Halo Design
Brushed aluminum finished metallic front baffle
16” W x 12.6825” H x 14.5” D
Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R2-A75M)
12 Gauge OFC Speaker Box Wire
Binding Post Terminal Cup
Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation)
2Ω Impedance
Frequency Response: 26-200Hz
Vented Enclosure Tuning Frequency: 36Hz
Sensitivity 82.3 dB
ProLink™ ported enclosure design
Optimal Sound Performance
750W RMS Power Handling
Includes preloaded R2-W10D4 10” R2-Series subwoofer
CARB compliant 3/4-inch MDF construction
Premium black carpet
Silver Alpine embossed side logo badge
1x Alpine KTE-10G.3 Grille for 10" Type-R and Type-S subwoofers - (KTE-10G.3)
Protect your subwoofer with a sleek and durable grille for your Alpine subwoofer.
SLEEK FINISH
Not only does the KTE-10G.3 offer added protection to your subwoofer, but the matte black finish also provides a sleek, professional look that will elevate the cosmetic appearance of your subwoofer. An Alpine logo badge gives this protective mesh grille a premium finished look.
DURABLE CONSTRUCTION MATERIAL
Made from the sturdiest materials, the KTE-10G.3 protects your subwoofer with a strong, metal mesh grille that has a powder-coated finish for extra protection.
EASY INSTALLATION
The KTE-10G.3 is designed for Alpine's R2-W10D4 and R2-W10D2 8" subwoofers and is easy to install with Alpine's twist-lock EZ change grille system. Just remove the subwoofer's trim ring, put the grille in place, and replace the trim ring.
FEATURES
10” Subwoofer Grille Kit
Black metal mesh grille
Fits the R2-W10D4 and R2-W10D2
What's in the Box:
Black metal mesh grille
Installation Instructions
