Description
Included in this kit
This bundle includes 2x Alpine SPV-65RGB-CAN 6.5” Cage-Mounted Universal Weather-Resistant Coaxial RGB LED Speaker Pods, 1x Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, and 1x Clarion CMR-L1 Marine LED Light Controller.
2x Alpine SPV-65RGB-CAN 6.5” Cage-Mounted Universal Weather-Resistant Coaxial RGB LED Speaker Pods - (SPV-65RGB-CAN)
Alpine Signature Sound – Engineered with Alpine’s signature sound quality, these speaker pods have been tested and proven to outperform the competition. Whether you’re tearing through the dunes or cruising along a forest trail, enjoy crystal-clear highs and rich mid-range tones that cut through the roar of the engine and the rush of the wind.
Built for the Outdoors – Weather can be unpredictable, but your sound doesn’t have to be. These speaker pods feature marine-grade, weather-resistant enclosures and drivers, ensuring top-notch performance even in the harshest environments. Rain, mud, or sun—these speaker pods are equipped to handle it all.
Customizable RGB Lighting - Stand out on the trail with front and rear RGB lighting that can be customized to match your vehicle’s style.
Versatile and Easy Installation - Designed with the adventurer in mind, these speaker pods are equipped with a universal cage-mount system that fits bars ranging from 1.5” to 2” in diameter—standard on most UTVs.
Main Features:
• Enclosed 6.5” Coaxial 2-Way Speaker Pods
• Front & Rear RGB Lighting
• Marine-Grade Weather-Resistant Enclosures & Drivers
• Coated Aluminum Cage-Mount for Easy Installation on 1.5” to 2” Round Bar
• 360-degree Rotational Adjustment
• Satin Black Finish with Mesh Grilles
TECH SPECS
• Woofer Size: 6.5” Cone
• Tweeter Size: 1” Teteron Dome
• Power Handling: 90W RMS / 225W Peak
• Frequency Response: 70Hz to 22kHz
• Impedance: 4 Ohms
• Sensitivity: 88dB
• Linear Excursion (X-Max): 4.9mm (1-Way)
• Speaker IP Rating: IP55
• Assembly IP Rating: IP66
• CTA-2031 Compliant
In the box:
• (x2) SPV-65RGB-CAN Speaker Pod
• (x2) Speaker Terminal
• (x2) RGB Terminal
• (x2) Top Gasket (>2” bar)
• (x2) Top Gasket (≤2” bar)
• (x4) Side Gasket
• Optional Surface Mount Bracket (Sold Seperately)
• Optional RGB Controller (Sold Seperately)
1x Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier - (KTA-30FW)
Get a huge increase in sound performance over your factory system. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30FW Weather Resistant Tough Power Pack is sure to add higher output and increased dynamic range for those open cab vehicles and toys.
Specifications:
• Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
• Weather resistant (IP66 rating)
• 150W x 4 D.P.P. (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• CTA-2006-B Specifications: 75W RMS x 4 (2Ω/4Ω, 14.4V, ≤ 1% THD+N)
• 82dB S/N (ref. 1W into 4Ω)
• >0.05% THD
• OEM-grade Tyco 26-pin connector with pigtail wire harness
• Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
• Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
• Input gain settings (variable)
• 2ch/4ch input (selectable)
DYNAMIC PEAK POWER
The KTA-30FW features Alpine’s exclusive Dynamic Peak Power (DPP) technology which uses a new dynamic power supply design that delivers bursts of power during rigorous musical passages. When the amplifier senses that more power is required, the power supply quickly increases the internal gain level, effectively doubling the power for a significant increase in dynamic range at high music volumes.
WEATHER RESISTANT FORMAT
The KTA-30FW is ready for your adventures. It is weather resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30FW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS.
The KTA-30FW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t.
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.
