Description
Included in this kit
This bundle includes 1x Alpine RUX-KNOB.2 Remote Bass Knob, 1x Alpine iLX-W770 Digital Multimedia Receiver with Wireless CarPlay and Android Auto Compatibility, 1x Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm, 2x Alpine S2-S65 - Next-Generation S-Series 6.5" Coaxial Speaker Set, and 1x Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink.
1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)
The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.
Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.
From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).
1x Alpine iLX-W770 Digital Multimedia Receiver with Wireless CarPlay and Android Auto Compatibility - (iLX-W770)
Upgrade your car's entertainment system with the Alpine iLX-W770, a sleek and powerful 6.75-inch shallow-chassis digital multimedia receiver. With Wireless Apple CarPlay and Android Auto, you can connect to your favorite apps, stream music, and access navigation effortlessly, all while keeping your hands on the wheel.
Designed for safety and convenience, the iLX-W770 features dual camera inputs, perfect for integrating both front and rear cameras, giving you greater visibility and control while driving. Switch easily between camera views to navigate tight spaces or monitor your surroundings.
This receiver doesn’t just connect you to your apps, it also enhances your car’s audio performance with its Sound Boost menu, allowing you to fine-tune bass, mid-bass, and subwoofer levels for a richer listening experience. The built-in 13-band graphic EQ and 6-channel time correction provide precise control over your sound, so you can enjoy your music just the way you like it.
For audio and video enthusiasts, the iLX-W770 is equipped with a 3.5mm SWC jack, AUX input, and USB input, supporting a wide range of audio and video playback formats, including AAC, FLAC, MP3, and more. Plus, it’s SiriusXM-Ready®, so you can enjoy your favorite satellite radio stations on the go.
Compatible with Alpine's PowerStack™ amplifiers, the iLX-W770 allows for easy mounting and control of PrismaLink™ subwoofers, adding stunning visuals to your in-car audio experience through Lighting Link Control.
Key Features:
6.75” Double-DIN Touchscreen Display
Wireless Apple CarPlay® & Android Auto™
Dual Camera Inputs for front and rear cameras
Built-in Amplifier: 16W RMS / 45W Peak x 4
Sound Boost Menu with Bass and Subwoofer Controls
13-Band Graphic EQ and 6-Channel Time Correction
PowerStack™ Compatible with Alpine KTA Amplifiers
Customizable Home Screen with 5-Color Key Illumination
SiriusXM-Ready® and Bluetooth® Hands-Free
1x Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm - (S2-A60M)
Reliable Performance and Value-Oriented Products -
Three new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.
Allows High Power Output -
Compact and Powerful: the new digital amplification circuit allows high power output while keeping a small footprint. The S-A60M measures just 204mm in width x 204mm in length for easy installation in virtually any vehicle.Along with Alpine’s new intelligent amplifier platform, the new S-Series amplifiers feature an improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback.
Specifications -
• Power Requirements: 14.4 V.DC (9 - 16 V allowable)
• Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V
• High Level Input with automatic power on
• Cable size: Power Cable AWG 4, SPK Cable AWG 8
• Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz - 400Hz
• THD+N (@ 10W into 4 ohms): <0.03%
• THD+N (@ 50W into 4 ohms): <0.08%
• Damping Factor: >1000
• Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
• Weight: 1.9 kg
Features -
• Amplifier Type: Class-D (Digital)
• Channel Design: Mono Channel
• Thermal Management Control
• Top Mounted LED Power/Status Indicator
• Speaker Level Input with remote turn on
• Crossover: Adjustable Low-pass (LPF)
• Gain Control: Adjustable
• Bass EQ
• Bass Control: Remote Bass Control (RUX-KNOB2) Ready
2x Alpine S2-S65 - Next-Generation S-Series 6.5" Coaxial Speaker Set - (S2-S65)
Alpine S2-S65 - Next-Generation S-Series 6.5" Coaxial Speaker Set
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance.
Hi-Res Certified – Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point.
Reliable Performance – Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
HAMR Surround - Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology is integrated into the speaker design which allows for maximum cone movement, delivering powerful and accurate bass notes.
Protect Your Speaker - The S-Series S2-S65 is compatible with the KTE-S65G Speaker Grille (sold separately). This sleek and stylish grille will not only add a visual upgrade to your speakers but also provide protection against any damage.
• Woofer Size: 6.5”
• Tweeter Size: 1” (Coaxial)
• Maximum Peak Power: 240W
• Maximum RMS Power: 80W
• Frequency Response: 70Hz - 40kHz (Hi-Res)
• Hi-Res Audio Certified
• Poly Propylene, Glass Fiber, and Mica Cone Material
• High-Amplitude Multi-Roll (H.A.M.R.) Surround
• Integrated 1” Tweeters (Coaxial)
• Compatible with KTE-S65G Speaker Grille (sold separately)
1x Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink - (S2-SB10V)
Double The Fun -
Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.
Dishing It Out -
The S2-SB10V comes loaded with Alpine's S2-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance.
Getting It Together -
Two S2-SB10V enclosures can be linked using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.
Features -
• 10" ported subwoofer enclosure
• loaded with Alpine's S2-W10D4 subwoofer
• linkable to second S2-SB10V enclosure with linking kit (sold separately)
• Kevlar-reinforced pulp cone with Santoprene rubber surround
• power handling: 600 watts RMS
• frequency response: 28-200 Hz
• 2-ohm impedance
• dimensions: 16"W x 12.75"H x 15"D
• warranty: 1 year
Specifications -
• Driver: Single 10"
• Impedance: 2Ω (dual 4Ω voice coils paralleled)
• Power Handling: 600W RMS
• Enclosure: Ported
• Frequency Response: 28-200Hz
• Port Tuning: 36Hz
• Dimensions: W = 16.0", H = 12.750", Depth = 15.0"
