Description
Included in this kit
This bundle includes 1x Alpine RS-W10D4 10-inch R-Series Shallow Subwoofer with Dual 4-Ohm Voice Coils, and 1x Alpine Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm.
1x Alpine RS-W10D4 10-inch R-Series Shallow Subwoofer with Dual 4-Ohm Voice Coils - (RS-W10D4)
ULTRA-SHALLOW DESIGN
For those looking to add powerful, hard-hitting bass performance to their vehicle but lack the space to add a subwoofer, Alpine’s R-Series Shallow Subwoofer delivers the same fun and loud sound you’ve come to expect, now in a shallow subwoofer that’s designed to fit in most vehicle applications.
EXTREME OUTPUT
Don’t let the size fool you – the R-Series Shallow Subwoofers feature the same motor movement (20MM of excursion) as the full-size R2-Series Subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series Shallow Subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling.
Precise Bass Control
Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control.
FEATURES
10” High-Performance Shallow Bass Driver
Alpine Gen2 DD Linear Magnetic Circuit
Cast Aluminum Frame
Aluminum Dust Cap
Neodymium Magnet
What's in the Box:
10” R-Series Shallow Subwoofer
Owner’s Manual
Warranty Information
Online product registration information
TECH SPECS
Mounting Depth: 3.25” (82.55mm)
X-Max: 20mm
Voice Coil: 4”(102mm)
Frequency response: 29Hz – 200Hz
Sensitivity (1W/1M): 83bB
Nominal Impedance: 4Ω
600W RMS / 1800W Peak Power Handling
Compatible with KTE-RS10G Subwoofer Grille Kit (sold separately)
RS-W10D4 - THIELE-SMALL PARAMETERS
• Sensitivity (1W/1m): 78 dB
• DC Resistance (Re): 3.6∆ + 3.6∆
• Free Air Resonance (Fs): 31 Hz
• Equivalent Stiffness: 23.35 L
• Mechanical Q (Qms): 5.72
• Electrical Q (Qes): 1.66
• Total Q (Qts): 1.19
• Cone Area (Sd): 380 cm2
• Linear Excursion (Xmax): 20 mm
• Mechanical Travel (Xmech): 54 mm
1x Alpine Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm - (HDA-V90)
Alpine Status delivers a superior level of audio performance that will take your music to a whole new level.
FEATURES -
• Hi-Res Audio Playback (192kHz/24Bit)
• 5-Channel Amplifier
• High-Efficiency Digital Circuit Design
• Alpine’s Dual Negative Feedback Control Circuit
• High Bandwidth Amplifier
• Alpine’s Premium Class D Circuit Design
• Copper-plated chassis
• Black circuit board
• One-sided terminal layout
• Top panel sound controls
• Quick connect power and speaker terminals
• Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately)
What's in the Box:
• HDA-V90 5-Channel Amplifier
• Owner’s manual
• “Birth sheet” that certifies by measurement the actual power of the amplifier in the box
• 4 Screws for amplifier mounting to the vehicle
• 2pcs. Mount bracket w/ 4 Screws for attachment to the amplifier
• 3pcs. Allen wrench for amplifier connection & installation – Sizes: 2mm/2.5mm/4mm
• 1pc. Quick connector block for Power/Ground/Remote wires
• 3pcs. Quick connector block for Speaker wires
TECH SPECS -
• Dimensions: 11.4375” x 7.5” x 2.125”
• Power Rating: (14.4V, ≤1.0% THD+N)
• 75W x 4 + 300W x 1 @ 4Ω
• 100W x 4 + 500W x 1 @ 2Ω
• Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only)
• THD+N: 0.02% (10W into 4ohm)
• S/N Ratio: 87dB (1W into 4ohm)
• Frequency response: 8-60kHz (-3dB)
• Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer)
• Selectable input level – HI/LO
• Selectable 2/4/6ch input
• Variable High pass / Low pass crossover
• Variable Subsonic filter (subwoofer)
• Bass EQ (0 to +12dB, Variable)
• Auto-turn on with remote sensing