Description
Included in this kit
This bundle includes an Arc Audio X2 650.1 Mono-Block Amplifier (Single-Channel), and 2x ARC Audio A-Series Flat 12" Subwoofer, Dual 4-Ohm, 600W Peak, 300W RMS.
1x Arc Audio X2 650.1 Mono-Block Amplifier (Single-Channel) (X2-650.1)
Arc Audio X2 650.1 Mono-Block Amplifier (Single-Channel)
Mono-Block Amplifier (Single-Channel)
Microprocessor Class-D Design
Designed And Engineered By Robert Zeff
High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality )
Level 1 X2 Cosmetics Package - Texture Coated Stamped Steel Cosmetic Cover With Aluminum Logo Badge. (Changable to Level-2 XDi Cosmetics)
Single Side Connection Design.
Nickel Plated RCA Terminals.
Quick Disconnect Speaker Terminal Plugs.
Audiophile Class-D Output Filter Networks.
Detailed Micro Processor Controlled Protection.
Large, High-Frequency Switching Power Supplies.
RCA Inputs Are Compatible With Speaker Level Inputs.
Fault Codes Storage Of The Last Protection Code Detected.
High Signal To Noise Ratio Without Compromising Power Output.
Fully Balanced Input Stage Significantly Increases Flexibility.
Ultra-Low ESR, High-capacity Power Supply Storage Capacitors.
Flexible Mounting Orientation For Vertical Or Horizontal Installations.
Next Generation High-Speed Class-D Technology Powering All XDi Amplifiers.
Bridged Mode Auto Detect Turn-On Works With Most Chip Based OEM Head Units
Precision Filtering Isolates The Power Supply Reducing Unwanted Interference In Radio Reception.
Block Type Terminal Connections
Specifications -
1- Channel @ 4 Ohms - 185 Watts
1-Channel @ 2 Ohms - 350 Watts
1-Channel @ 1 Ohms - 650 Watts
Frequency Response - 20Hz - 230Hz
Crossover Range - 30Hz - 230Hz / 24dB
Bass Boost - Variable 0-12 dB @ 30-155Hz
Remote Level Control Included - Yes
Input Sensitivity (Low) - 200mV - 3.5V
Fuse - 2 x 30 Amp
Dimensions - 9.020"(L) x 6.268"(W) x 2.162"(H)
2x ARC Audio A-Series Flat 12" Subwoofer, Dual 4-Ohm, 600W Peak, 300W RMS (A12-D4)
ARC Audio ARC Audio A12-D4
A-Series Flat 12" Subwoofer, Dual 4-Ohm, 600W Peak, 300W RMS
The A-Series subwoofers were designed specifically for applications with limited space that require a lower profile than a standard subwoofer. Performance is designed for the street enthusiast who wants good sound quality, the ability to have some fun at higher output levels, and is still a fraction of the price of higher-end subwoofers like the SW Series. The A12 is available in both 2-ohm or 4-ohm configurations. The A-12 only requires a 3.85” mounting depth and all models feature multi-point geometric basket/motor component resonation control which reduces losses found in a traditional subwoofer. The theme of the A-Series was meant as a tribute to the US armed forces, its dedicated members, and the technology that makes them a superior force around the world. Just like the iconic aircraft that they are named after, the A-12 features advanced technology, is hard-hitting, and is very robust. The A-12 comes in at a 600-watt peak and 300 watt RMS. Simply put, it’s a great all-around sub without breaking the bank!
A-Series subwoofers use a Progressive heat pressed Poly injected Pulp cone delivering a very light weight, durable and sonically proven design maximizing accuracy of the sub across a wide spectrum and level of listening conditions.
The A-Series Surround is composed of simple UV Grade Polyether. This materials is a proven performer in subwoofer manufacturing with above standard performance ratings and exceptional resistance to UV, Humidity, and stress.
A Progressive Twisted Pile Polycotton Nomex Blend spider is used offering premium control and voice coil alignment while minimizing overall mass. This progressive material design allows the sub to execute equal linear control of the moving components at nearly any amount of level of demand being placed on it improving accuracy and overall output at all operating levels.
Imported from Japan the A-Series subwoofers exclusively use Totku Copper Voice Coil windings securely manufactured around a unique spunlaced layered Nomex former with ultra hi-temperature adhesives. These materials and adhesives combined using and stage up adhesive tempering process created the ultimate in thermal resistance and reliability under maximum design demand.
A-Series subwoofers used a proprietary tooled Cold Rolled Steel stamped steel basket design.
All gluing surfaces are cleaned and then surface laser etched and primed prior to adhesive and parts application for maximum bonding strength and maximum reliability in hi-demand and maximum stress conditions.
All Adhesives and bonding agents are dried using time/temp/humidity controlled bonding process in an environmentally controlled drying room based on the adhesive manufacturers specifications for maximum bonding strength and reliability.
Specifications:
A-Series subwoofers use a Progressive heat pressed Poly injected Pulp cone delivering a very light weight, durable and sonically proven design maximizing accuracy of the sub across a wide spectrum and level of listening conditions.
The A-Series Surround is composed of simple UV Grade Polyether. This materials is a proven performer in subwoofer manufacturing with above standard performance ratings and exceptional resistance to UV, Humidity, and stress.
A Progressive Twisted Pile Polycotton Nomex Blend spider is used offering premium control and voice coil alignment while minimizing overall mass. This progressive material design allows the sub to execute equal linear control of the moving components at nearly any amount of level of demand being placed on it improving accuracy and overall output at all operating levels.
Imported from Japan the A-Series subwoofers exclusively use Totku Copper Voice Coil windings securely manufactured around a unique spunlaced layered Nomex former with ultra hi-temperature adhesives. These materials and adhesives combined using and stage up adhesive tempering process created the ultimate in thermal resistance and reliability under maximum design demand.
A-Series subwoofers used a proprietary tooled Cold Rolled Steel stamped steel basket design.
All gluing surfaces are cleaned and then surface laser etched and primed prior to adhesive and parts application for maximum bonding strength and maximum reliability in hi-demand and maximum stress conditions.
All Adhesives and bonding agents are dried using time/temp/humidity controlled bonding process in an environmentally controlled drying room based on the adhesive manufacturers specifications for maximum bonding strength and reliability.
Specifications:
| Power Handling (Peak) | 600 Watts |
| Power Handling (RMS) | 300 Watts |
| Impedance | s4 Ohm |
| Minimum Sealed Enclosure | 0.85 cu ft |
| Optimum Sealed Enclosure | 1.0 cu ft |
| Maximum Sealed Enclosure | 1.25 cu ft |
| Cutout Diameter | 11" |
| Mounting Depth | 3.85" |
Extra Information
Brand:
ARC Audio
Weight:
22.00 LBS
RMS Wattage Per Speaker:
300
UPC:
199730561827
Bundle:
Yes
Feature 1:
This bundle includes an Arc Audio X2 650.1 Mono-Block Amplifier and 2x ARC Audio A-Series Flat 12" Subwoofers, perfect for enhancing your audio experience.
Feature 2:
The X2 650.1 amplifier features a microprocessor Class-D design for superior sound quality and efficiency.
Feature 3:
Enjoy powerful bass with the A-Series 12" subwoofers, offering 600W peak power and 300W RMS for deep, rich sound.
Feature 4:
Designed for tight spaces, the A-Series subwoofers have a low-profile design without sacrificing performance.
Feature 5:
Experience high signal-to-noise ratio and flexible installation options with the X2 650.1's advanced features.
Condition:
NEW
Weight:
22.0000 lbs
Shipping:
Free 2-Day Shipping!