Description
The Club A758 8-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your car. You can also bridge the amp to 2-channel mode to drive a couple subs with 250 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your vehicle’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.
Features and Benefits
Compact size
The JBL Club A758 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.
High and low level input
Speaker-level and low-level inputs allow the Club A758 to integrate with both aftermarket and factory car stereo systems.
Variable crossover
Unlike many amplifiers available at similar prices, the JBL Club A758 features variable electronic crossovers for precise system tuning and performance.
Low noise and distortion
The Club A758 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced engine noise.
Technical Specifications
General Specifications
8 channel car amplifier
75 watts RMS x 8 at 4 ohms (125 watts RMS x 8 at 2 ohms)
250 watts RMS x 4 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
Fuse rating: 105A
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=360mm x 51.3mm x 180mm WxHxD= 14-3/16” x 2-1/16” x 7-1/8”
What’s in the Box
One Club A758 eight channel amplifier
8 Bare wire-to-RCA adapters
6 35A ATO fuses (3 installed, 3 spare)
Two JBL stickers
Owner’s Manual
4 Mounting screws (M4 x 53mm)
1 logo badge
2 x L - Small Allen wrench
Features and Benefits
Compact size
The JBL Club A758 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.
High and low level input
Speaker-level and low-level inputs allow the Club A758 to integrate with both aftermarket and factory car stereo systems.
Variable crossover
Unlike many amplifiers available at similar prices, the JBL Club A758 features variable electronic crossovers for precise system tuning and performance.
Low noise and distortion
The Club A758 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced engine noise.
Technical Specifications
General Specifications
8 channel car amplifier
75 watts RMS x 8 at 4 ohms (125 watts RMS x 8 at 2 ohms)
250 watts RMS x 4 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
Fuse rating: 105A
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=360mm x 51.3mm x 180mm WxHxD= 14-3/16” x 2-1/16” x 7-1/8”
What’s in the Box
One Club A758 eight channel amplifier
8 Bare wire-to-RCA adapters
6 35A ATO fuses (3 installed, 3 spare)
Two JBL stickers
Owner’s Manual
4 Mounting screws (M4 x 53mm)
1 logo badge
2 x L - Small Allen wrench